Jump to content
Alexander Ilin

Suggestions for Kaspersky Security Center 10. [In progress]

Recommended Posts

I'd like to be able to schedule KES upgrades using avpsus. For example, I only want it to run installs from 7 PM to 5 AM because users start coming in around 6:30 AM and I don't want to hear them whining about how slow their computers are. :)

 

Also, I 'd like to know in advance when an upgrade will become available in "my region" so I can plan to deploy it. A pinned forum post like the following would suffice: On January 15, 2017 KES SP2 will be available for installation via avpsus in North America or USA or however a region is defined in Kaspersky kingdom. :)

Share this post


Link to post

Hi,

 

I want to make a request for feature in Kaspersky Security Center 10 and KES10 latest for the Application startup control.

 

The Feature request is that currently we can add the Application on the basis of categories i.e. "Internet Softwares -- >Software Downloaders. So here we can select only the "Software Downloaders however there are different vendors in the same category i.e. "Microsoft and Nokia Etc." I will to block 1 specific application inside the Microsoft category which is "Windows Store".

 

I believe in current version this is not possible so we want this feature in KSC/KES10 so that we can even select a specific application by a specific vendor not just the whole category.

 

I am sure that this can be done. Kindly let us know here if this can be considered as a future request for adding the feature.

 

Let me know if you have any question for this scenario. I will try to explain again.

 

Regards,

 

Yasir

Share this post


Link to post

I inherited a mess of a Kaspersky install and I've got to say we're moving away from them soon, though for reasons unrelated to your administrative problems. (We were unable to get Endpoint 10 to work over our slow network and we don't like the idea of rolling back to Endpoint 6.) But the AV engine itself does seem to work well and we'd probably stick with it... if only we could make it work.

Share this post


Link to post

We are suggesting that a Mobile scan feature will be included.. Therefore all mobile phones connected with the Computer will be scanned like all other external drives..

 

We are suggesting that a Mobile scan feature will be included.. Therefore all mobile phones connected with the Computer will be scanned like all other external drives..

Share this post


Link to post

Hi,

 

This feature is very much required in my scenario.

 

Many user work on field and in office, they go on business trip for 3 days to more then a month.

 

I face issue keeping network agent connected to KSC. I have to change the IP manually to keep it connected, number of such users are high.

 

The public IP is not accessible from LAN network and public IP is not even good for controlling clients over internet. eg. Task menu in client property does not work, also it is very slow while taking effect of any changes made in policy and tasks.

 

 

I request for feature where network agent has option for local IP and Public IP and it first tries to connect to local IP, if the KSC server not available then tries to connect public IP.

 

This feature will be very useful for me and others having same issue.

 

Thank you.

Share this post


Link to post

Hello,

 

We are suggesting to add Full-text search by the Description column on the list of computers in administration groups. We have a customers which use Description colum and want to have text searching by the Description.

Share this post


Link to post
I inherited a mess of a Kaspersky install and I've got to say we're moving away from them soon, though for reasons unrelated to your administrative problems. (We were unable to get Endpoint 10 to work over our slow network and we don't like the idea of rolling back to Endpoint 6.) But the AV engine itself does seem to work well and we'd probably stick with it... if only we could make it work.

 

What can't you make work?

Share this post


Link to post
Dear friends,

 

We are pleased to create this new topic where you can share your ideas, suggestions and feedback on Kaspersky Security Center 10.

 

Your messages will be handled by our leading Testing and R&D specialists, which will allow us to consider both operational and technical aspects of an issue.

 

We would like to remind you that your feedback and comments on other products are welcomed at the corresponding subforum: Suggestions for current and future versions of KL products.

 

 

For users who have advanced licensing implemented, you can migrate the folder from the path C: \ ProgramData \ KasperskyLab \ adminkit \ 1103 to any other location, since the moment of correcting the vulnerabilities the disk space is overflowed and there is constantly That expand its free space.

 

Thank you. :dash1:

Share this post


Link to post

Hello,

 

we are suggesting to add a report for network usage on client in ksc report. most of the time , we need know , which application use network traffic in our network( client and servers) and how much traffic does ita use per day or hour .

 

Br,

 

Share this post


Link to post

Hello,

 

we are suggesting to add a report for network usage on client in ksc report. most of the time , we need know , which application use network traffic in our network( client and servers) and how much traffic does it use per day or hour .

 

Br,

Edited by Rashty

Share this post


Link to post

It would be nice to be able to search for or create a computer selection for active key IDs (Which computers do not have the new key installed? -> start a task). Right now, it is only possible to get that information out of a report, but that does not allow me to start a task (for these computers).

 

It would be nice to have a computer status like “license blacklisted/blocked” (like “license term expires soon” or “license term expired”). When a license is blacklisted/blocked, this computer does not have the state “license term expired” therefore a new state would be great. Furthermore, a state like “license term blacklisted soon” would be great.

 

Share this post


Link to post

When installing 3rd party updates it will sometimes need programs to be closed before the install can be completed, however the message displayed to end customer is too vague and in some cases our end customers think it is a virus - see attached screenshot.

 

please can you add a few more words to make it look like a proper/official install, something like:

 

"Kaspersky is updating vulnerable 3rd party software on your computer to keep you protected from attacks, before this can begin you need to close the following programs and then click retry"

 

Additionally can you display the name of the application being updates, or the update package being installed as end customers generally don't understand what chrome.exe or iexplore.exe is (techies do, but users don't)

 

Can you also make an option to remove cancel?

 

At minimum adding some more sensible text should be very achievable for your devs to do

 

thanks

post-441385-1487784044_thumb.png

Share this post


Link to post
3rd party updates: In the case of flash player, this window is not mandatory any more. That's why I suggested to not show it any more:

see https://forum.kaspersky.com/index.php?showt...id=2664890&

 

Did you get a resolution on that? as I dont see one and it's still In Progress and a month has passed.

 

Suggest you bump response it, to see if here or on your thread an answer for controlling this can be given :)

Edited by aseddon

Share this post


Link to post

unfortunately not. I basically download the install_flash_player_ie.exe file from Adobe and install it with "-install" option but that is additional work to do.

I am of the opinion that the software should not annoy users when it is not necessary (and our users complain in that case).

 

I agree that this window does not tell the user what it is all about. It should have a meaningful name.

 

Share this post


Link to post

I'm not sure has been required on a previous reply but it would be interesting for me having a pop up to advise the users that an installation of a product is going to start and a message to the users is showed.

I have seen that on some multi country mass delivery scenario in different time zone an unaware user restart the pc while a KES installation is running creating a lot of problem with the installation.

A pop up message might advise the user to keep the PC running and not to restart it until the procedure has completed preventing corruption on the installation.

Now I have just a message the might appear at the end of the task.

thanks

Riccardo

Share this post


Link to post

Would be really helpful to have a way to print or at least view all details of a policy, even if its 10 pages long or has a ridiculous scroll bar.

Share this post


Link to post

A request for KSC 10/KAV 10

Message template - Advanced - Web control - Policy

 

When the client PC is on the network web page blocking messages to be configurable. Currently if a machine is on the LAN a notification message gets sent to the administration console only.

However, if the machine is a laptop and is not on the network the notification gets sent as an email.

I would like it to be configurable so that the LAN clients can also email a unblock request. Currently I need to keep logging into the admin console to see if there are any requests to unblock web sites that have been mis-categorised by Kaspersky's categories.

 

Many thanks.

Share this post


Link to post

Request for email notification from Kaspersky when updates are available.

 

If you are looking to upgrade your Kaspersky KSC/KAV environment it can be very difficult to locate the latest installs and currently available patch fixes. It would be nice to have some sort of notification available so that the end users are aware of updates.

I am currently running the very latest versions of KSC and KAV however I am awaiting SP2 due to some outstanding bugs that I know have been fixed in this SP2 release, but I currently have to keep checking the web site to see if they have been released yet as the beta test has now finished and complete.

 

Thanks.

Share this post


Link to post

Sorry. Another request, although a very small one. In the templates for the web control. The variable called %complain_email% I'd like it to be %request_email% or at least give control over the word that actually appears in the message to the employee.

Most of our employees are not comfortable with complaining. :rolleyes: :rolleyes:

Share this post


Link to post

Automatic updates! There should be no reason why anyone has to manually update applications any more. I'm trying to move from Symantec Endpoint to KES, but the manual upgrade is a huge negative and making me rethink the conversion.

 

Also, not having an MSI version for business customers is a huge negative. Not everyone wants to run a dedicated admin console just for AV, web based cloud solutions are more than enough.

Share this post


Link to post

Change single same parameter on multiple selected policies

For example, if I have 10 policies for the same product and I want to change a single parameter for all of them, I have to make that change on any single policy.

It would be great to make a multiple policy selection , edit, and modify the parameter(s) so the change will be applied to all selected policies.

Thank you

Edited by Andrea Valpiani

Share this post


Link to post

Suggestion: The ability to change the package an (already existing) installation task installs.

 

Why:

A this time (v10.3.407), when a new Kaspersky application version is released (say Kaspersky Endpoint Security) I have to re-create all my installation tasks with this new package.

A simple dropdown selector in the installation task properties window would ease this.

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.