Jump to content
cocorina

kesl-supervisor.service failed to start

Recommended Posts

when I install kesl beta verison on my test machine running on centos 7, I encounter error when I run setup.pl

 

Error: Job for kesl-supervisor.service failed because the control process
exited with error code. See "systemctl status kesl-supervisor.service" and
"journalctl -xe" for details.
kesl not started
[root@localhost bin]# systemctl status kesl-supervisor.service
● kesl-supervisor.service - kesl
   Loaded: loaded (/etc/systemd/system/kesl-supervisor.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Fri 2017-12-15 00:31:43 PST; 17s ago
  Process: 27817 ExecStart=/etc/init.d/kesl-supervisor start (code=exited, status=255)

Dec 15 00:31:33 localhost.localdomain systemd[1]: Starting kesl...
Dec 15 00:31:43 localhost.localdomain kesl-supervisor[27817]: /etc/init.d/kesl-supervisor: line 170: kill: (27827) - No such process
Dec 15 00:31:43 localhost.localdomain kesl-supervisor[27817]: kesl could not be started
Dec 15 00:31:43 localhost.localdomain systemd[1]: kesl-supervisor.service: control process exited, code=exited status=255
Dec 15 00:31:43 localhost.localdomain systemd[1]: Failed to start kesl.
Dec 15 00:31:43 localhost.localdomain systemd[1]: Unit kesl-supervisor.service entered failed state.
Dec 15 00:31:43 localhost.localdomain systemd[1]: kesl-supervisor.service failed.
[root@localhost bin]# cd /etc/init.d/
[root@localhost init.d]# ls
functions  kesl-supervisor  netconsole  network  README
[root@localhost init.d]# ./kesl-supervisor status
kesl is stopped
[root@localhost init.d]# ./kesl-supervisor start
Job for kesl-supervisor.service failed because the control process exited with error code. See "systemctl status kesl-supervisor.service" and "journalctl -xe" for details.
kesl not started
[root@localhost init.d]# vi /etc/init.d/kesl-supervisor
[root@localhost init.d]# vi /etc/init.d/kesl-supervisor

Any idea?

Share this post


Link to post

[root@localhost bin]# ./kesl-setup.pl

Kaspersky Endpoint Security 10 SP1 for Linux Beta version 10.1.0.46


Setting up the Anti-Virus Service default locale

You must specify a locale that the Anti-Virus Service will use when
applying the protection settings.
It is important to specify the locale you are using when working with the
file system names (in most cases this should be the system default locale)
[en_US.UTF-8]:

Anti-Virus Service default locale is changed to 'en_US.UTF-8'.
Service will be restarted if it is already running.

Configuring file interceptors

Checking if fanotify is available...
Cannot use fanotify
Setting up kernel-level real-time protection
Linux kernel source code is found at
'/lib/modules/3.10.0-514.el7.x86_64/build'.
>>> Building the kernel-level real-time protection module using the Linux kernel source code from /lib/modules/3.10.0-514.el7.x86_64/build.
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
CentOS Linux release 7.3.1611 (Core)
checking for linux kernel sources... /lib/modules/3.10.0-514.el7.x86_64/build
checking for linux kernel version file... /lib/modules/3.10.0-514.el7.x86_64/build/include/generated/utsrelease.h
checking for linux kernel version... 3.10
checking for arch_ptrace... found, address 0xffffffff81038a10
checking for access_process_vm... found, address 0xffffffff811b21b0
checking for __ptrace_link... found, address 0xffffffff81094280
checking for __ptrace_unlink... found, address 0xffffffff810945e0
checking for get_empty_filp... found, address 0xffffffff812001f0
checking for release_open_intent... found, address 0
checking for sys_call_table... found, address 0xffffffff816a0800
checking for kstrdup... found, address 0xffffffff8119ee00
checking whether dentry.d_child is available... no
checking whether struct inode_operations have rename2... yes
checking whether struct inode_operations have dentry_open... yes
checking whether __ptrace_link uses task cred struct as a third argument... no
configure: creating ./config.status
config.status: creating redirfs/Makefile
config.status: creating Makefile
config.status: creating kavmon.h
config.status: creating osdef.h
config.status: creating module.linux/Makefile

>>> Compiling the kernel-level real-time protection module
Cleaning redirfs
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs clean
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
rm -f ../bin//redirfs.ko
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
Cleaning module.linux
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux clean
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
rm -f ../bin//kav4fs_oas.ko  redirfs Module.symvers Modules.symvers
rm -f kernel.c queue.c cache.c cache.h  kavmon.h  kernel.h  osdef.h  queue.h  util.h
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'
Making link in redirfs
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs modules
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_path.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_root.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_info.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_file.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_dentry.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_flt.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_inode.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_dcache.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_chain.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_ops.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs_data.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/rfs.o
  LD [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/redirfs.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/redirfs.mod.o
  LD [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/redirfs.ko
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
Making link in module.linux
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux modules
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/module.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/interface.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/interface_monitor.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/files.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/operations.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/kernel.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/queue.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/cache.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/interceptor_rfs.o
  CC [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/watchdog.o
  LD [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/kav4fs_oas.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/kav4fs_oas.mod.o
  LD [M]  /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/kav4fs_oas.ko
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'

>>> Installing the module as /lib/modules/3.10.0-514.el7.x86_64/misc/kav4fs_oas.ko

>>> Installing the module as /lib/modules/3.10.0-514.el7.x86_64/misc/redirfs.ko
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs clean
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
  CLEAN   /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/.tmp_versions
  CLEAN   /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs/Module.symvers
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
rm -f ../bin//redirfs.ko
rm -f Makefile
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/redirfs'
make[1]: Entering directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'
make -C /lib/modules/3.10.0-514.el7.x86_64/build SUBDIRS=/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux clean
make[2]: Entering directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
  CLEAN   /var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux/.tmp_versions
make[2]: Leaving directory `/usr/src/kernels/3.10.0-514.el7.x86_64'
rm -f ../bin//kav4fs_oas.ko  redirfs Module.symvers Modules.symvers
rm -f kernel.c queue.c cache.c cache.h  kavmon.h  kernel.h  osdef.h  queue.h  util.h
rm -f Makefile Makefile.in
make[1]: Leaving directory `/var/opt/kaspersky/kesl/10.1.0.46_1513326086/opt/kaspersky/kesl/src/kernel/module.linux'
rm -f Makefile config.status config.log kavmon.h osdef.h
>>> Rebuilding modules.dep
>>> Probing a new module
Starting Kaspersky Endpoint Security 10 SP1 for Linux Beta. This can take
some time. Please wait.

Error: Job for kesl-supervisor.service failed because the control process
exited with error code. See "systemctl status kesl-supervisor.service" and
"journalctl -xe" for details.
kesl not started

Share this post


Link to post

Please execute the commands and send the listing:

/opt/kaspersky/kesl/bin/fanotify-checker; echo $?

/opt/kaspersky/kesl/libexec/kesl --disable-watchdog

Thank you!

Share this post


Link to post
1 hour ago, cocorina said:

is 32 bit. Thanks.

Please use 32 bit app for 32 bit OS and 64 bit app for 64 bit OS.

Mixed 32 and 64 configurations are not supported.

Thank you.

 

Share this post


Link to post

×

Important Information

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.