Jump to content

comengamf

Members
  • Content Count

    14
  • Joined

  • Last visited

About comengamf

  • Rank
    Candidate
  1. Hi I need to know the Answer to this aswell ..if possible. Thank you
  2. Hi Does "Cluster ID" Setting in the KSMG ->General Settings-> "Integeration with KSC" section (see https://support.kaspersky.com/12297 ) has any thing to do with clustering? Our network contains two Edges and two Hubs connected to these Edges, and by Default the Edges are balancing mail traffic between the Hubs. Is it possible to install two KSMGs and configure them to load balance mail traffic between Hubs (the Edges will no longer be nessary)? if so, will this scenario also account for Fail over as well?
  3. Hi Exact version as shown in the title of the topic KSE 9 (Kaspersky Security for Exchange server version 9.0.129.0). My Issue is that we need to replace Microsoft Forfront for Exchange with KSE 9 We are currently Implementing a policy on HUB/CAS exchange servers that Excutable files cannot be sent or received internally or Externally. Also keyword based filtering (which i allready know that it exists in kaspersky DLP Module) We are still evaluating KSE 9 + new Dlp module to see if we can fullfill same policy we are implementing currently with ms forfront for exchange.
  4. Hi I need to know if its possible to Block outgoing and/or Incoming messages based on attachment file types. It Doesn't matter how but I need to know is it possible to do that centrally. Is the new DLP module capable of doing that? because I cannot find a category related to file types (although its a trivial feature) Thanks
  5. Dear team I have Installed Network Agent Package For Linux (deb): klnagent_8.5.0-662_i386.deb and KES 4 Linux Package kes4lwks_8.0.1-50_i386.deb on Operating System: ubuntu 12.04 64bit as follows: 1- Requirement packages with ubuntu 12.04 64bit #sudo apt-get install -y libc6-dev build-essential libc6-i386 gcc-multilib lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6 libc6:i386 libncurses5:i386 libstdc++6:i386 samba perl which* gcc make build-essential libc6-dev glib* gdebi binutils libc6-i386 gcc-multilib lib32z1 lib32ncurses5 lib32bz2-1.0 lib32stdc++6 libc6:i386 libncurses5:i386 libstdc++6:i386 ia32-libs 2- Download & Install Kaspersky network agent #wget products.kaspersky-labs.com/products/multilanguage/workstations/keslinux/klnagent_8.5.0-662_i386.deb #dpkg -i --force-architecture klnagent_8.5.0-662_i386.deb #/opt/kaspersky/klnagent/lib/bin/setup/postinstall.pl 3- Download & Install Kaspersrky Endpoint for linux #wget http://products.kaspersky-labs.com/product...0.1-50_i386.deb #dpkg -i --force-architecture kes4lwks_8.0.1-50_i386.deb #/opt/kaspersky/kes4lwks/bin/kes4lwks-setup.pl and when I run Klnagchk utility I get that Connection With Administration Server is OK But i can't see the PC on the server I've tried to Search it's name, it's IP Address and even i Searched for any machine with linux operating system but I can't find it i can ping admin server from The PC and telnet 13000 and 14000 from it also I can Ping PC From Admin Server I've tried to discover it using IP Scan I found it but it shows in admin Kit (-/-) for Net agent and Endpoint (No Net agent/no end point) best regards
  6. Hi Same Issue Ticket No: INC000004252347 Best Regards
  7. Hello Can i just instal the svm server in one ESXi host and then move it to these hosts with the problem. I've tried to do that allready but i'm not sure it's ok to do that or not
  8. Helo All ESXi hosts are in the same subnet also all SVMs which I tried to install i gave them IPs in the same subnet with the securiy centre. As i metioned two of themsucceeded and two faild (the ones with he UCS) Could you Please give me an Idea what is the possible circumistanses on which this error ussually generates. Thanx for your support
  9. I'm not sure acctually what could be the reason I'm pretty sure that settings in each ESXi host are almost identical The only difference is that the ESXi host that is in the cisco UCS give the following error whenever we try to instal an SVM on it:- "IP adrress for creating SSH session not detected" this error appeares in the following stage of SVM deployment:- "selest IP Address to start SVM configuration process" -see attached Host hardware Version:- "Cisco Systems Inc UCSB-B200-M3" please give me an idea about what information do you need. and what possibly can be the reason for this kind of error tmp_12260_KSV_SSH_Error_report_933928959.txt
  10. Thanx for the quick reply. I forgot to mention that i Applied FDE Policy only and After start-up Windows freezes totally after few seconds - only mouse pointer is working - So there is no chance to do any thing I've tried to Open KES 10 Interface to activate a commercial key but once i do this computer freezes before opening the interface. my guess is that with the trial key expired all components will be disabled including Encryption Components and that makes it impossible to access files in the encrypted hard disk. is that right ?? if not please I'd like to know the behavior of the KES 10 Encryption Components when a trial Expires and when Commercial key expires (it'll be Great if there is a document or article). also what to do to recover this Laptop knowing that its almost impossible to do any thing in the time frame before PC freeze?? thanx again
  11. Hi.. I installed KES 10 MR1 on Laptop with Encryption Ready Package I have applied Encryption Policy on this laptop with a trial key and the key now expired. each time I log into the PC after loading windows 7 and shows desktop it freezes after seconds. I've tried to Activate it with the new commercial Key from Security center but it seems that network agent is unable to load Because the computer freeze before that. I wonder is this relate to the expired trial key. and is there a way to recover from this issue ??
  12. Hello there We have 10 ESXI 5.5 Hypervisors All Administered with the same VCentre server and VMs inside them Are in Different Subnets. I tried to Install SVMs on four Hypervisors Two Succeeded but two installations failed. I got a message of Failure on the Phase of "select ip address to start svm configuration process" stating that there is a failure in getting IP For SSH Connection. the only Difference Between These Hypervisors (the two With SVMs Successfully installed and the two Failed to install) is that the two Hypervisor which failed to install SVM is with a different Vendor (cisco UCS). I Appreciate your Help Finding the Main Cause of this failure and how to Resolve it.
×
×
  • Create New...

Important Information

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.