Jump to content

Recommended Posts

Do a Start >> Run >>cmd /k ipconfig /all on both machines and post it here.

Edited by Whizard

Share this post


Link to post
Do a Start >> Run >>cmd /k ipconfig /all on both machines and post it here.

 

 

sorry to be so stupid in asking this, but how do i copy / paste the info or must I write it down?

 

:blink:

Share this post


Link to post
sorry to be so stupid in asking this, but how do i copy / paste the info or must I write it down?

 

:blink:

Start - Run: cmd

Enter the following command:

ipconfig /all >C:\ipconfig.txt

 

You will find a text file called ipconfig.txt in C root. You can then copy/paste from there.

 

Paul

Edited by p2u

Share this post


Link to post
Start - Run: cmd

Enter the following command:

ipconfig /all >C:\ipconfig.txt

 

You will find a text file called ipconfig.txt in C root. You can then copy/paste from there.

 

Paul

 

 

Sorry about this Paul, i did what you said and it did its stuff. when i searched all my c drive i cannot find any file called ipconfig.txt i have show hidden files and folders checked and the only results are 1 x EX_File, 3 x exe files and 1 x PF File.

 

I must be doing something wrong.

 

 

Thanks for your patience..

 

Tim.....

Edited by dross

Share this post


Link to post
Sorry about this Paul, i did what you said and it did its stuff. when i searched all my c drive i cannot find any file called ipconfig.txt i have show hidden files and folders checked and the only results are 1 x EX_File, 3 x exe files and 1 x PF File.

 

I must be doing something wrong.

Thanks for your patience..

 

Tim.....

ipconfig.txt is not a hidden file. Try again please very quietly. Don't forget the cmd which I forgot to write (I later corrected my post)... Copy and paste the command, don't write it yourself.

 

Paul

Edited by p2u

Share this post


Link to post
ipconfig.txt is not a hidden file. Try again please very quietly. Don't forget the cmd which I forgot to write (I later corrected my post)... Copy and paste the command, don't write it yourself.

 

Paul

 

 

here is the report for the laptop running windows xp

 

 

 

Windows IP Configuration

 

 

 

Host Name . . . . . . . . . . . . : LAPTOP

 

Primary Dns Suffix . . . . . . . :

 

Node Type . . . . . . . . . . . . : Unknown

 

IP Routing Enabled. . . . . . . . : No

 

WINS Proxy Enabled. . . . . . . . : No

 

DNS Suffix Search List. . . . . . : Belkin

 

 

 

Ethernet adapter Wireless Network Connection:

 

 

 

Connection-specific DNS Suffix . : Belkin

 

Description . . . . . . . . . . . : Intel® PRO/Wireless 2200BG Network Connection

 

Physical Address. . . . . . . . . : 00-0E-35-4A-4E-FF

 

Dhcp Enabled. . . . . . . . . . . : Yes

 

Autoconfiguration Enabled . . . . : Yes

 

IP Address. . . . . . . . . . . . : 192.168.2.2

 

Subnet Mask . . . . . . . . . . . : 255.255.255.0

 

Default Gateway . . . . . . . . . : 192.168.2.1

 

DHCP Server . . . . . . . . . . . : 192.168.2.1

 

DNS Servers . . . . . . . . . . . : 192.168.2.1

 

Lease Obtained. . . . . . . . . . : 23 August 2008 18:52:12

 

Lease Expires . . . . . . . . . . : 19 January 2038 04:14:07

 

i will send part 2 in a moment

 

Thank you

 

 

Share this post


Link to post
here is the report for the laptop running windows xp

Windows IP Configuration

Host Name . . . . . . . . . . . . : LAPTOP

 

Primary Dns Suffix . . . . . . . :

 

Node Type . . . . . . . . . . . . : Unknown

 

IP Routing Enabled. . . . . . . . : No

 

WINS Proxy Enabled. . . . . . . . : No

 

DNS Suffix Search List. . . . . . : Belkin

Ethernet adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Belkin

 

Description . . . . . . . . . . . : Intel® PRO/Wireless 2200BG Network Connection

 

Physical Address. . . . . . . . . : 00-0E-35-4A-4E-FF

 

Dhcp Enabled. . . . . . . . . . . : Yes

 

Autoconfiguration Enabled . . . . : Yes

 

IP Address. . . . . . . . . . . . : 192.168.2.2

 

Subnet Mask . . . . . . . . . . . : 255.255.255.0

 

Default Gateway . . . . . . . . . : 192.168.2.1

 

DHCP Server . . . . . . . . . . . : 192.168.2.1

 

DNS Servers . . . . . . . . . . . : 192.168.2.1

 

Lease Obtained. . . . . . . . . . : 23 August 2008 18:52:12

 

Lease Expires . . . . . . . . . . : 19 January 2038 04:14:07

 

i will send part 2 in a moment

 

Thank you

 

Paul, on the Vista Pc i run the cmd then paste the txt and it reports back access is denied.

 

Any thoughts. sorry :icon20:

 

Share this post


Link to post
Paul, on the Vista Pc i run the cmd then paste the txt and it reports back access is denied.

 

Any thoughts. sorry :icon20:

Hm... That must have to do with UAC and the lack of rights you have. Maybe someone else can tell you; I'm on XP...

 

Paul

Edited by p2u

Share this post


Link to post
Hm... That must have to do with UAC and the lack of rights you have. Maybe someone else can tell you; I'm on XP...

 

Paul

 

 

thats weird as I have admin rights to the pc.

 

many thanks for your help so far :rolleyes:

Share this post


Link to post
You have to run command prompt ELEVATED.

 

 

OK, can I have instructions on how to do this please.

 

many thanks

Share this post


Link to post
OK, can I have instructions on how to do this please.

 

many thanks

To launch an elevated command prompt in Vista, hit the Win key; type cmd; press Ctrl+Shift+Enter; and then hit Alt+C to confirm the elevation prompt.

 

Paul

Share this post


Link to post
To launch an elevated command prompt in Vista, hit the Win key; type cmd; press Ctrl+Shift+Enter; and then hit Alt+C to confirm the elevation prompt.

 

Paul

 

I bow to your greatness, here is the info

 

 

Windows IP Configuration

 

Host Name . . . . . . . . . . . . : Timspc

Primary Dns Suffix . . . . . . . :

Node Type . . . . . . . . . . . . : Hybrid

IP Routing Enabled. . . . . . . . : No

WINS Proxy Enabled. . . . . . . . : No

DNS Suffix Search List. . . . . . : Belkin

 

Ethernet adapter Local Area Connection:

 

Connection-specific DNS Suffix . : Belkin

Description . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

Physical Address. . . . . . . . . : 00-1D-92-D8-66-1A

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Link-local IPv6 Address . . . . . : fe80::c124:add8:c5ea:e018%10(Preferred)

IPv4 Address. . . . . . . . . . . : 192.168.2.3(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Lease Obtained. . . . . . . . . . : 23 August 2008 09:09:02

Lease Expires . . . . . . . . . . : 30 September 2144 02:41:57

Default Gateway . . . . . . . . . : 192.168.2.1

DHCP Server . . . . . . . . . . . : 192.168.2.1

DNS Servers . . . . . . . . . . . : 192.168.2.1

NetBIOS over Tcpip. . . . . . . . : Enabled

 

Tunnel adapter Local Area Connection* 6:

 

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface

Physical Address. . . . . . . . . : 02-00-54-55-4E-01

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

 

Tunnel adapter Local Area Connection* 7:

 

Media State . . . . . . . . . . . : Media disconnected

Connection-specific DNS Suffix . : Belkin

Description . . . . . . . . . . . : isatap.Belkin

Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

 

 

Hope you can make something of it..

 

Tim...

Share this post


Link to post
Did that and even raised the number to 40 but to no avail. My laptop just cannot see my Home pc. what has happened with upgrading to the 2009 version?

 

hope you can help.

 

:icon20:

Was the key missing? If so try lowering the number to 15 decimal.

Did you have printer sharing and if so can you print from laptop?

Share this post


Link to post

can you ping one computer from the other? Start>Run>type in "cmd" (no quotes)>ok and type ping 192.168....If this works from each computer the computers are talking to each other. Then the problem is down to the home network computers not seeing each other. If the ping works look in event viewer for any red error messages and double click. This might give you the solution. I had this same problem. It took me 12-15 hours to try to fix it. I came across IrpStackSize, and tried it, it didn't work, but I found out later I put the number in wrong. I finally called a PC tech to come to the house. He couldn't figure it out either. I mentioned IrpStackSize, he opened "event viewer" and it was lit up in red. He double clicked and the solution he got was IRP.....He put in the registry entry, guessed and typed in a number (25) and it worked. He had never come across this before, I gave him the answer and he charged me $75. But it was worth it. So hang in there.

P.S. You might have a look at this: http://www.vistax64.com/vista-networking-s...me-network.html

Edited by TrueGreen

Share this post


Link to post

Thats your problem right here. You other machine is communicating via IPv6 and the second via IPv4. Unbind IPv6 from TCP/IP stack on Vista machine.

Edited by Whizard

Share this post


Link to post

Hi I've read this whole thread by they way for I have had the same problems.

 

I have a laptop running Vista using KIS 2009

My Desktop is running XP pro using KIS 2009

 

On my Vista laptop I can see my desktop but on my Windows XP pro system I cannot see my Vista laptop.

 

I can ping between the both of them. Any thoughts as why I cant see my Vista laptop from my XP pro desktop.

 

I get no ping loss.

 

While on my laptop (running Vista)in the CMD prompt I type "ipconfig" On one line towards the top it says IPv4 Adress......192.168 blah blah But on my desktop (running XP) in the CMD prompt I type "ipconfig" it only says IP Address..........192.168 blah blah......would that by the problem.

 

I couldn't figure out how to save the CMD stuff to .txt file. But I could take Screen shots of it and attach it.

 

 

p.s. Can people hack my computer if I post that GetSystemInfo Parser information???? I will post it...if it will help.

If I can help any of you by giving you my settings please ask I will help.

Share this post


Link to post
p.s. Can people hack my computer if I post that GetSystemInfo Parser information????

Welcome. No. If it was a security issue, no one would be asked to post it. GSI will show if Network Adapter needs update, basic system information, and if there are any number of other possible issue areas. Please post it.

Share this post


Link to post
I couldn't figure out how to save the CMD stuff to .txt file. But I could take Screen shots of it and attach it.

1. Click START > Run and type (without quotes) "cmd" into box and click OK

2. Copy/paste "ipconfig /all >C:\ipconfig.txt" (no quotes and space between ipconfig /)

3. Click "Enter" on keyboard.

4. To find the .txt file double click "My Computer" on the desktop, then double click (C:) disk. You'll see the file there named ipconfig.txt.

Share this post


Link to post
Was the key missing? If so try lowering the number to 15 decimal.

Did you have printer sharing and if so can you print from laptop?

 

irp stack size was missing and i added it starting at number 25. I shall try lowering it to see if that helps.

 

Prior to all this, i had kaspersky on my 2 laptops and the home pc. all were version 7. I was happily sharing printers, files folders etc. i then upgraded to the new version and from then on my troubles started. My home pc and 1 of the laptops just refuse to see each other. in my network places there is no mention of each other.

 

Before if the laptop was missing from the network place, i used to click "view workgrouped computers" and it used to show up. But now each time i click view workgrouped computers it just beeps at me.

 

It is very frustrating as all was working fine until the upgrade. I am a firm believer of "If it aint broke, dont fix it" but with a respected product like Kaspersky I assumed there would be no major issues. How wrong was I??

 

Anyway i shall keep perservearing with this little issue.

 

On another note. My other laptop running xp can see the home pc running vista and vice versa, weird. the problem is this laptop :angry:

 

many thaks again to all who have helped.

 

Regards

 

Tim....

Share this post


Link to post
Thats your problem right here. You other machine is communicating via IPv6 and the second via IPv4. Unbind IPv6 from TCP/IP stack on Vista machine.

 

 

many thanks, youve guessd it, how do i do that??? :dash1:

 

nice simple instructions please if possible :rolleyes:

Share this post


Link to post
many thanks, youve guessd it, how do i do that??? :dash1:

 

nice simple instructions please if possible :rolleyes:

 

 

Right I unticked IPv6 and restarted computer

 

Nothing. Still they dont see each other. T

 

I check and they are in the same workgroup, (just in case it had changed)

 

sorry guys this is a toughy!!!

Share this post


Link to post

1) Reset your Winsock TCP/IP adapters (http://support.microsoft.com/kb/299357)

2) Remove everything NIC related under Network Adapters in your Device Manager, make sure you have View >> Show Hidden devices ON (nothing should be left except WAN Miniports)

3) Import my attached file into the registry (you might have to run elevated due to UAC)

4) Reboot the machine and post he ipconfig /all again

DisableIPv6.rar

Edited by Whizard

Share this post


Link to post
Guest
This topic is now closed to further replies.

×
×
  • Create New...

Important Information

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.