Jump to content
Alexander Ilin

Suggestions for Kaspersky Security Center 10. [In progress]

Recommended Posts

When rolling out Encryption to 100+ PCs it would be very helpful if you could control the default domain in the pre-boot authentication screen through KSC. Therefore when the user gets to the pre-boot authentication screen they only have to worry about getting their username and password correct. Many of my users wont know what a domain is never mind being able to enter it correctly!!

 

I am currently having to access every PC manually before distributing them and press F10 and enter the domain. This way the next time a user logs onto the PC the domain should remember what was selected before. Unfortunately a curious user may decide to press F10 for themselves, so maybe the hint 'To change domain press F10' could be removed if the above was not possible?

 

Thanks.

 

 

Oh and I'm not sure whose idea it was to roll out a product that doesn't even include QWERTY (UK) as an option! Did they not plan to sell it to the UK?

Share this post


Link to post

What about bulk adding data? I have to add about 100 exclusions is there a way to import these bulk exclusions with a CSV or something.

Share this post


Link to post

Whenever I'm creating a package or checking results of a task I am unable to minimize the window. Sometimes it could take a few minutes to add a package to the Administration Server and when that happens I'm unable to do anything else on the console. Any way you could and the minimize button so I can continue to work while the package is being loaded?

Share this post


Link to post
Whenever I'm creating a package or checking results of a task I am unable to minimize the window. Sometimes it could take a few minutes to add a package to the Administration Server and when that happens I'm unable to do anything else on the console. Any way you could and the minimize button so I can continue to work while the package is being loaded?

 

yes

Also when you want start application manually from the properties .

Share this post


Link to post

I would really like to have the option to remove the "Complain" links found in user messages (specifically Device Control popups, but I'd like to see all of them gone). If a user would like to lodge an objection in our organization, they must contact our Help Desk by entering a Service Request via an internal website or by telephone. We do not want them to see a Complain link as we will not act on requests submitted in that fashion.

 

Also, I'd like to be able to suppress the scanning progress/results from popping up after inserting a removable disk (we perform a quick scan on every insertion). The user doesn't need to know that it is being scanned unless there is a malware detection.

 

For Full Disk Encryption, I'd like to see a better looking power-on UI. We currently use Sophos which has a pretty slick interface to enter the domain/username/password, and we'd like to migrate to Kaspersky's FDE but the UI is not acceptable to our upper management.

Share this post


Link to post

hi

 

please i have an issue. i just purchased kaspersky endpoint security 10.2 for 50 users. i want to install it on my windows 8.1 system and windows server 2008R2 but it said its not compatible.

 

also i forgot the password i used to install on a particular client system as i want to renew the license on the system, the password icon popped up to type it in but i cant remember. please how can i go about this.

 

i am not using the security center. i install manally on each system.

 

i was able to renew some clients systems but not the ones with password.

 

please help.

Share this post


Link to post

hi

 

please i have an issue. i just purchased kaspersky endpoint security 10.2 for 50 users. i want to install it on my windows 8.1 system and windows server 2008R2 but it said its not compatible.

 

also i forgot the password i used to install on a particular client system as i want to renew the license on the system, the password icon popped up to type it in but i cant remember. please how can i go about this.

 

i am not using the security center. i install manally on each system.

 

i was able to renew some clients systems but not the ones with password.

 

please help.

Share this post


Link to post

Grey out options that you are not licensed for. I've got the Select licence which does not have the Connect to Computer element enabled but the options are still there. Simple to grey out those options you are not licensed for!

Share this post


Link to post
post-528855-1421651489_thumb.jpg

according to attachment, when application privilege control prompt for action i don't know which program is mean?

 

seconded. we don't really run into it much, but it would be nice to have that info there. I have to assume its something the user downloaded and ran [which is usually safe upon inspection] but it seems like the point is to stop unauthorized/problem programs, or hidden programs, so more info would be great.

Share this post


Link to post
seconded. we don't really run into it much, but it would be nice to have that info there. I have to assume its something the user downloaded and ran [which is usually safe upon inspection] but it seems like the point is to stop unauthorized/problem programs, or hidden programs, so more info would be great.

Which version (build) you are using? PF359 is solving this problem by 10.2.1.23.

Share this post


Link to post

I would like to see some extra tools built into the right-click options, such as shutdown, restart.

Share this post


Link to post

The ability to setup Notifications based on Group rather than on Task. Currently if I want an email to go out as soon as a virus is found it is set at the Policy level, Under Advanced Settings/Interface/Notifications. That's all well and good if you are a small installation. However, if you are dealing with multiple locations it would be nice to be able to set different Notifications for different groups. I know I can setup a million different Policies and then configure each of them, but does that make any sense? If a policy change is needed then you have to do it in a million different places. It would be better if we could set some basic settings on the Group that a client is in - Who to notify in case of a virus would be one of those items.

Share this post


Link to post

Report bugs:

1. in ksc 10.2.434 in the properties of network agent installation package settings section (use server certificate) is selected that cause after remote install network agent, clients cannot connect to administration server.

2. executable files in repository do not show and cannot add files in the group of application privilege control with policy.

Thank you

Share this post


Link to post
Report bugs:

1. in ksc 10.2.434 in the properties of network agent installation package settings section (use server certificate) is selected that cause after remote install network agent, clients cannot connect to administration server.

2. executable files in repository do not show and cannot add files in the group of application privilege control with policy.

Thank you

sorry about bug 2. i have mistake. it is disabled by default to increase performance

thank you

Share this post


Link to post

New Idea - Ability to see current policy status / name on the endpoint security user interface.

 

Thanks

 

Share this post


Link to post

1. Add mechanism to slipstream or add patches to remote installation tasks for Kaspersky products from KSC. Instead of having to create and run multiple tasks from KSC.

2. Add server policy name to local KES client (maybe in support or somewhere else). Like to confirm policy changes when moving between groups and out of office.

3. Allow easier chaining of individual tasks for computers in KSC. For example, when one tasks completes and another must run after it completes for certain PCs, without having to edit all the tasks to add the computer names. Copy it from the parent task. I'm suggesting a workflow UI change.

4. Allow the new icons in the columns (Agent installed, Agent running and Antivirus) to be turned off in KSC 10.2.434 when computers are listed. The big red circled exclamation marks dominate the UI. At least shrink that icon and change to a cooler shade of red or another color.

Edited by Peter222

Share this post


Link to post

Dear Alexander,

 

we have one problem with last version, i said in below:

 

When we restore Backup of KSC 10.1.249 on KSC 10.2.434, Backup restored successfully but KSC can't connect to administration server. we check Services, Credential, Account.

even we ran Switch Account Utility but we hadn't any result.

 

Thank dear.

 

Dear friends,

 

We are pleased to create this new topic where you can share your ideas, suggestions and feedback on Kaspersky Security Center 10.

 

Your messages will be handled by our leading Testing and R&D specialists, which will allow us to consider both operational and technical aspects of an issue.

 

We would like to remind you that your feedback and comments on other products are welcomed at the corresponding subforum: Suggestions for current and future versions of KL products.

 

Share this post


Link to post

Patch B should solve your problem.

 

Steps:

1. Backup the old KSC

2. Install a fresh KSC

3. Install Patch B

4. Restore Backup.

Share this post


Link to post

Improvement Suggestion:

 

Can we get an updated version of MySQL supported for the database? The 5.0 branch hasn't been maintained for over three years.

Share this post


Link to post

Some KSC GUI related requests

 

Smarter sorting on computers tab within KSC.

--Sorting by status columns (agent installed, running, etc) doesn't work at all

--Sorting by columns with version numbers is somewhat random

--There is no column to sort or filter out offline/disconnected machines

--Retain column settings between launching of KSC and switching of admin servers. Currently if you customize which columns are shown in which order, it constantly gets re-set

--New filter added in SP1 does not allow for network agent, protection or database version filters (probably the most useful columns of all)

--Rename, consolidate or otherwise make the difference on some fields more apparent (i.e. Info Update, vs Visible vs Connection to Server vs Last update). With so many fields its sometimes difficult to know which is the "real" last update time of a computer.

--With SP1 when a machine is offline/disconnected it reports that Agent is not running, this makes things look worse than they are

 

 

Share this post


Link to post

Return the functionality to select and delete all Domain groups simultaneously.

 

In KAK8, if I wanted to delete all the folders in Unassigned computers\Domains, I would select Domains then select all the folders (ctrl-a) in the right pane and select delete. In KSC9/10, when I click Domains, nothing shows up in the right pane. See attachment. Shift-click and ctrl-click do not work to select multiple folders. To delete all the folders, you have to select each one at a time and be prompted if "you really want to delete the group" each time.

 

post-113744-1431711195_thumb.jpg

Share this post


Link to post

×
×
  • Create New...

Important Information

We use cookies to make your experience of our websites better. By using and further navigating this website you accept this. Detailed information about the use of cookies on this website is available by clicking on more information.