KRD24

[stavros957]

Not booting krd.iso

while loading the iso it stops here:   {17.71801}   platform INT3515:01: deferred probe pending

and doesn't go any further.  Τhe previous version 18 had no problem.

my pc:

m/b : MSI MAG B460 TOMAHAWK (MS-7C81)

CPU: Intel Core i5-10400

GPU: NVIDIA GeForce GTX 1070

MEMORY: TWO KINGSTON (8X2gb)  DDR4-2666 / PC4-21300 DDR4 SDRAM UDIMM

 

[AlexeyK]

49 минут назад, stavros957 сказал:

Not booting krd.iso

Writing the image in ISO mode (recommended)

Цитата

2. Download the linux firmware package from the kernel website.

The linux firmware package is required for correct operation of computer hardware after loading Kaspersky Rescue Disk: Wi-Fi, USB modems, monitor and other devices.

3. Place the linux firmware package in the root of the removable drive.

[stavros957]

Thanks for your answer AlexeyK, 

I followed your instructions, but it still doesn't enter the desktop. Decompresses the firmware file, doesn't display the above message , ( platform INT3515:01: deferred probe pending),
but stops at the previous line: IPv6: ADDRCONF (NETDEV_CHANGE): enp3s0: link becomes ready,                                    and doesn't go any further.

Thank you for your time.

 

 

[AlexeyK]

2 часа назад, stavros957 сказал:

and doesn't go any further.

Try this (starting the application in limited graphic mode). If it doesn't work, you may contact @Yury N. and provide him with a hardware information file (see the same article). 

Edited February 22 by AlexeyK

[stavros957]

11 hours ago, AlexeyK said:

Try this (starting the application in limited graphic mode). If it doesn't work, you may contact @Yury N. and provide him with a hardware information file (see the same article). 

 

Starting the application in limited graphic mode before adding the firmware, it loaded but it gave the message <some hardware does not work correctly, add the archive with firmware package......> after adding the firmware everything is fine in limited graphics mode. (I didn't know where to download it.).  Thanks!!!

Is there a possibility to make the machine work in full graphics if I send the hardware information file to @Yury N. ?

[AlexeyK]

10 минут назад, stavros957 сказал:

Is there a possibility to make the machine work in full graphics if I send the hardware information file to @Yury N. ?

I don't know, you may ask him after sending this file.)