Firewall problem after update from IS2020 to 2021

[fiorepip]

With IS 2020 any problems.

after update to IS 2021, the firewall prevents a scan from being sent to the pc from the kyocera centralized multifunction printer.ip printer on the same network (192.168.1.50). I tried several rules with no solution. Temporaly, to solve the problem I have to disable the firewall before sending the document.

Thank you in advance

[richbuff]

Welcome. Have you checked the Settings to see if your local network is set to Trusted?

[fiorepip]

t was set up as a public network. now i set it as private network but the office is closed. i will try next monday if the problem is solved. thanks

[fiorepip]

Welcome. Have you checked the Settings to see if your local network is set to Trusted?

Problem solved with your tip.

Than you very much