helzayat

Thanks Andrey, I tried the custom KRD but didn’t see what the difference is from the regular one. Is it supposed to help with RAID? I saw the Intel document before, but it seems to only talk about creating a RAID in Linux, deleting all data on the drives. I need to access an existing RAID. mdadm --assemble gives an error “no superblock” on the member drives

I tried modprobe. Screenshot attached. Seems module was loaded but ethernet didn’t start. Is there a way to make the module load on boot so I can see if rebooting starts it?

My system has a RAID1 volume consisting of two 6TB drives under Intel RST. I attach a screenshot of the BIOS showing the RAID volume, and of the RAID Disk in Disk Management in Windows 10. Under Linux, I see two separate drives (sda and sdb) and each partition is repeated twice in File Manager. I am afraid if I scan one of the disks and KRD modifies it, this will break my RAID1. Is it possible to mount this RAID volume in Linux (mdadm?) without damaging it?

I followed the suggestions in the two previous messages. Unfortunately, the module was not inserted - “Unknown symbol”. I attach the screenshot and the lspci result.

OK Thanks. Here is the zip file renamed as .txt.

Thanks Andrey, same problem: krd2018_hwinfo_032E02B4-0499-054B-6706-880700080009_2020_02_25.11_42_38.tgz.zip: Sorry, we couldn't upload your file because we don't support that file type. Supported file types: zip, pdf, xml, txt, csv, doc, docx, xls, xlsx, ppt, pptx, jpg, jpeg, gif, png

I am trying to provide hardware info, but the forum won’t allow me to attach a .tgz file. I converted it to a .zip file but still I get: krd2018_hwinfo_032E02B4-0499-054B-6706-880700080009_2020_02_25.11_42_38.zip: Sorry, we couldn't upload your file because we don't support that file type. Supported file types: zip, pdf, xml, txt, csv, doc, docx, xls, xlsx, ppt, pptx, jpg, jpeg, gif, png I tried to shorten the name but it still wouldn’t accept it. How do I provide the hardware info?

My computer’s on-board network adapter is an Intel I219-V. It works fine in Windows, but when I boot the KRD it does not see it, there is no network adapter available. As I have KRD on a USB stick, can I download a driver in Windows and put it on the stick, then install it after I boot KRD? Kaspersky Rescue Disk 18.0.11.0(c) (built at 2019.08.09 18:25:54)