bbs2web

Just to clarify our problem with PXE booting Kaspersky in a KVM environment. Whilst ‘virtio_net.ko’ is already included it, as with virtio_scsi.ko, requires the ‘virtio_pci.ko’ kernel module.

Hi Andrey, This was perfect, managed to rebuild the initrd.xz file to include additional drivers by booting a VM using the ISO and then replacing the initrd.xz file on our TFTP server with the /tmp/initrd.xz file. mkdir /tmp/initrd && cd /tmp/initrd; xz -d -c -k /livemnt/boot/boot/grub/initrd.xz | cpio -i; for f in aufs aufs-x86_64; do cd /tmp/initrd/lib/modules/4.9.57-$f/kernel/drivers; mkdir block; cp -a /lib/modules/4.9.57-$f/kernel/drivers/virtio .; cp -a /lib/modules/4.9.57-$f/kernel/drivers/block/virtio_blk.ko block; cp -a /lib/modules/4.9.57-$f/kernel/drivers/block/cciss.ko block; cp -a /lib/modules/4.9.57-$f/kernel/drivers/scsi .; done cd /tmp/initrd; find . | cpio -H newc -o | xz --check=crc32 --x86 --lzma2 > /tmp/initrd.xz; Would be great if the Rescue disk could be amended to include virtio_blk.ko (VirtIO block device) and virtio_pci.ko (needed by the newer virtio_scsi.ko (VirtIO SCSI block device) driver which itself is already included). ie: Please include as a minimum: virtio_pci.ko & virtio_scsi.ko virtio_blk.ko PS: For anyone looking for TFTP instructions, they are here: https://support.kaspersky.com/15271 Regards David Herselman

I have Kaspersky working via PXE for most physical hosts but KVM virtual guests show the following error: Text of the error: No ethernet interfaces found on your system, PXE boot won't work. Cannot get a DHCP address. Check the cables on the ethernet interfaces. I can temporarily set the KVM virtual guest to use an emulated Intel e1000 network card, perform PXE, get to the desktop and then hot unplug the Intel e1000 and replace it with a paravirtualised VirtIO ethernet interface. I can also boot off the ISO and networking simply works. The output of ‘lsmod | grep ^virtio’ shows the following: virtio_net virtio_scsi virtio_console virtio_balloon virtio_pci virtio_ring virtio I'm pretty sure this is simply due to virtio_net and virtio_pci not both having been included in the compressed kernel image. How do I check and rebuild the initrd image to include additional drivers? Regards David Herselman