Advice and solutions for Kaspersky Security for Internet Gateway
15 topics in this forum
-
The materials provided on the Advice and Solutions (Forum Knowledgebase) part of the Forum result from the work of the Kaspersky Customer Support team and Forum community members. They are shared here for ease of use of Kaspersky products, deploying and configuring them. Please remember that using commands or recommendations from the articles without a clear understanding of their purpose may result in errors or system inoperability. Please note that some materials presented are not official, so technical support may decline to support a specific unsupported configuration in some instances. Please also ensure to use the official documentation, found in this link…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Prerequisites To replace the WebUI certificate you need two files: PEM encoded certificate or certificate chain file PEM encoded private key file (without passphrase) You can generate a self signed certificate using the following command, specifying FQDN of the node in Common Name field: openssl req -x509 -nodes -sha256 -days 365 -newkey rsa:2048 -keyout key.pem -out cert.pem Certificate replacement procedure Connect to the node over SSH and enter Technical Support Mode Place the files (cert.pem) and (key.pem) into /root Go to we…
-
- 0 replies
- 4k views
- 1 follower
-
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description Error looks like this. Blocking via rules works correct, but instead of KWTS blocking page you see an error "ERR_TUNNEL_CONNECTION_FAILED" Cause You can read about this in Online help "The reason for this is that in order to establish encrypted HTTPS connections the user's computer requests from the proxy server a connection to the web server using an HTTP message containing the CONNECT method (hereinafter also "a CONNECT request"). The ability of proxy servers to process CONNECT requests and reply to them is limited at the level of the HTTP protocol…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description Error looks like this: You can't download trace log. But there is free space on the disk: Cause You will see this error if free disk space less than 10G. KWTS is not in sizing 200 GB of hard drive space, which includes: 25 GB for temporary file storage 25 GB for log file storage How to solve a problem Bring disk sizing to minimum hardware requirements
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description After generating a trace log and then attempting to download it via the KWTS 6.1 web interface, it fails with an error if the trace log is more than 1GB (one gigabyte). The error is duplicated on different devices in different browsers: Mozilla, Chrome, Edge. In Mozilla, the download stops with "Failed to download file" Chrome goes into an endless download attempt, the download is interrupted at 1GB, after which the speed drops to 0kb/s and the download starts all over again. How to solve To resolve the problem with downloading a large trace…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description You can face an issue like this on Events page in KWTS: Sometimes the search on the Events page works correctly. Sometimes not.. If you collect har-file (HOW TO) from Events page with reproduced issue you will see an error also in it: Also you can find an error in diagnostic_info\logs\var\log\kaspersky\kwts\extra\webapi.log: celery.backends.base.SoftTimeLimitExceeded: SoftTimeLimitExceeded(True,) Then you should check Maximu…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Descriptrion You can see an issue like this: You can also find log entries like this in diagnostic_info\logs\var\log\kwts-traces.log Line 1538367: Jan 11 18:12:33 kwts2 KWTS Licenser[1154]: 1241 INF httpcli#011Req 0x7fecd003b9d0 CURL: Could not resolve host: activate.activation-v2.kaspersky.com Line 1538460: Jan 11 18:12:33 kwts2 KWTS EventLogger[1062]: 1102 DBG APP: void lms::event_logger::LoggerHelperProcFrontend::SendCommand(const lms::event_logger::HelperProcCommand&…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. There are 2 types of installer within:https://www.kaspersky.com/small-to-medium-business-security/downloads/internet-gateway?icid=gl_sup-site_trd_ona_oth__onl_b2b_klsupport_tri-dl____gateway___ Version 6.1.0.4762 | Red Hat Enterprise Linux | Localization package Version 6.1.0.4762 | Red Hat Enterprise Linux | Distributive What' the difference between these two packages? Localization package is something you install additionally after installing distributive (application package) to get the local language (for example, Japanese). You can see the order here: …
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. How to connect to KWTS via SSH or receive the files via SCP? Below are the examples of using Putty and WinSCP tools. In the puttygen utility (from the Putty package): Type of the key to generate: RSA. Generate the key. Protect the key with a password (key passphrase). Save the private key. Copy the public key from the field "Public key for pasting into OpenSSH authorized_keys file" In the KWTS web interface: Paste the copied public key into the SSH key field https://support.kaspersky.com/KWTS/6.1/en-US/183526.htm In Putty: …
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description and cautions Sometimes you may need KWTS to write syslog messages to different log's name or/and path. We're talking about this setting: Steps below were performed on Centos 7+ x64 and Ubuntu 20.04/22.04 x64 KWTS 6.1 NOT ISO By default it's set to local1, and depending on OS KWTS writes syslog messages to: 1) CentOS > /var/log/messages 2) Ubuntu > /var/log/syslog Details So here's how to change default behavior: Change value on web interface to, for instance, local0 Modify /var/…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description and cautions Here's how to configure export only detects from KWTS to external syslog server, which accepts TCP stream on facility local1. Details Create file /etc/rsyslog.d/kwts-detects.conf with contents as per below (replace SERVER:PORT by your external syslog server, @SERVER:PORT if UDP is in use instead of TCP) $ActionQueueFileName KWTSDetects $ActionQueueType LinkedList $ActionQueueMa…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. To use HAProxy as a load balancer in front of KWTS (iso installation and built-in proxy used) we recommend the following: HAProxy configuration: global log 127.0.0.1 local2 chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy …
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. General information Kaspersky Web Traffic Security does not have a regular function of integration with external services via the ICAP protocol, however, it can be added by manually changing the configuration files of the built-in proxy server from the technical support mode. Important: ICAP integration works in synchronous mode - data transfer is suspended until the ICAP server processes the request. This may introduce additional delays in the processing of user traffic, thus reducing the performance of the proxy server. The external ICAP service must be able to process a suf…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Introduction Often problems with Kerberos are difficult to diagnose but they occur if you're deploying KWTS for the first time. There are three functional places in the product where Kerberos authentication can be used: Proxy authentication This is needed for users to authenticate on the proxy server automatically without login prompt. If login prompt pops-up, then Kerberos authentication failed. LDAP authentication This is needed for KWTS to synchronize LDAP cache with LDAP servers (simply put - with domain controllers). This cache is used in Rules creation an…
-
Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Issue: Some log files in KWTS take up a lot of disk space. Log rotation for these files does not work For example: Information Information about logs sizing and rotation you can find in files in /etc/logrotate.d folder on the KWTS server. The size of log files should be no more than: Log file In what file it described Size of a log file should be no more than: …