Skip to content
View in the app

A better way to browse. Learn more.

Kaspersky Support Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Kaspersky Internet Security freezing pc whenever there is a high internet usage

  • Author

Hello, I had been experiencing stuttering audio issue since I had upgrade my internet connection to a 100 Mbps Fiber Connection a few weeks ago. I was using a wireless 4G Mobile Network through a 4G router before which only had a download and upload speed of 23+ Mbps.

 

I found out that it was Kaspersky Internet Security causing the stuttering issue when there is a high internet usage after searching a lot on google. At first I thought it was the Ethernet LAN driver so I had tried upgrading and downgrading the driver version but none of them helped.

 

I did not experience this problem with my old connection because it only had a download and upload speed of 23+ Mbps which was slow but with the new 100Mbps connection when I do a speed test or watch a YouTube video the audio and my mouse cursor would freeze for a second several times if the video is still downloading, it affects the PC audio as a whole. It doesn’t matter if I play a music or video on YouTube, Windows Media Player, VLC, or Browsers (Chrome and Firefox) whenever there is a high internet usage but when the downloading is done and there is no internet usage the problem is gone.

 

It doesn’t seem to effect me while gaming or while streaming a video on facebook because it only uses a few Mbps around 20, it only happens when the download and upload speed gets above 50+ Mbps.

 

Turning off Kaspersky Internet Security completely fixes the issue but when I turn the Anti virus back on the pc would start freezing again when there is a high internet usage. Using the internet through Wifi doesn’t seem to be effected with the stuttering problem.

 

Featured Replies

Hello,

MTU is Maximum Transmission Unit. Its value 1500 is a normal setting in all router by default. If you set MTU high above 1500. Your router or ISP will drop data packet, You can not access the internet. others you can not set value below 64. It is related to the collision of Ethernet frame in half duplex, If you have intersted in it, You can research its theory.

Regards.

  • Author

Hello @Wesly.Zhang,

 

Thank you for explaining, I’ll do more research on MTU later.

 

I have tried re-enabling klim6.sys by typing the following in the command prompt

sc start klim6
sc config klim6 start=boot

but when I reboot the computer its not running automatically anymore. For running the traces I had to manually enable the klim6 service by typing sc start klim6. What should I do to make it run automatically like it was before? Thanks!

 

Hello @Wesly.Zhang,

 

Thank you for explaining, I’ll do more research on MTU later.

 

I have tried re-enabling klim6.sys by typing the following in the command prompt

sc start klim6
sc config klim6 start=boot

but when I reboot the computer its not running automatically anymore. For running the traces I had to manually enable the klim6 service by typing sc start klim6. What should I do to make it run automatically like it was before? Thanks!

 


Hello,

You should disable KL self-denfense first and run the command to try:

sc config klim6 start= auto

Regards.

  • Author

Hello @Wesly.Zhang,

 

I have disabled the Kaspersky Self Defense when I executed those commands in command prompt in Administrator mode and it reports that the configuration was successful but when I reboot the computer and check the status of the “klim6” service by typing

sc queryex  klim6

It says that the Klim6 service is stopped and is not running, so I have to manually start it by typing

sc start klim6

For now I have left the klim6 service turned off as it did not start with windows when I rebooted the computer. Thanks!

Hello,

After disabling product self-defense, Try to do the following step:

First, You should confirm to change file name c:\windows\system32\drivers\klim6.sys.bak  to klim6.sys.

Second, run this command and check this register value as below (type = 1) ,if no, please edit it to 1 :

sc config klim6 start= auto

 Third, restart PC. Please check whether it is running or not after reboot pc.

Regards.

  • Author

Hello @Wesly.Zhang,

 

Thank you very much. The klim6 service is finally running again after typing

sc config klim6 start= auto

but I have disabled the “Network Attack Blocker” in Kaspersky as it started stuttering / freezing again when I started the klim6 service  back on.

  • 2 weeks later...

Hello @Wesly.Zhang,

 

Thank you very much. The klim6 service is finally running again after typing

sc config klim6 start= auto

but I have disabled the “Network Attack Blocker” in Kaspersky as it started stuttering / freezing again when I started the klim6 service  back on.


Hello,

What information provided by KL support now?

Regards.

  • Author

Hello @Wesly.Zhang,

 

I was told to update my Network Card LAN Drivers, remove Internet Download Manager, disable Flow Control and Enable or Disable TCP/IP Offloading but none of them helped. So I had told the KL support that disabling the “Network Attack Blocker” or “Klim6” Service is the only temporary fix to eliminates the stuttering / freezing issue completely. 

 

I have been using the computer with klim6 service disabled for now.

 

KL support told me they have forwarded the updated information to the experts to have a detailed look at it and provide a resolution but I still haven’t got a reply after 9 days. Thanks!

  • 4 months later...

Hello,

Thank you for replying back. Should we do a test for kaspersky ndis filter driver? The operation is simple and as below:

  1. Disable KL product self-defense. You know how to disable it, right?
  2. Execute the command in command prompt with administrator privilige:
    sc stop klim6
    sc config klim6 start=disabled

     

  3. Rename C:\windows\system32\drivers\klim6.sys as klim6.sys.bak.
  4. Reboot PC
  5. Enable KL product self-defense.
  6. Check this issue again. Please post back the result.

Regards.

Finally,Took me a day to find this post。

 

This issue haunted me for like years, whenever I download games on Steam/Blizzard、tranfser file via NAS、using BT client always causing my system stuttering。I tried Quit The AVP、Disabled Whole Network Security Option,finally narrow down the problem on the Network Attack Blocker.

 

Seems they still aren't fixed this issue, on Mar 30, 2021. Is there any difference between your solution and “Disabled Network Attack Blocker” ?If Klim6 being disabled, is it related to other Network Security Option(such as firewall)?

 

Oh btw Im not disabled the hyper threads, so in my case is your rules works for me?

  • 5 months later...

hello i have exactly the same problems ..i have now deactivated Network Attack Blocker..

is there in the meanwhile a solution or patch for this problem ?

i know this issue from another av engine which cause the same problems and also that it slows down the internet connection for 1 gig networks.

these freezings of the whole system while downloading via steam or similar platforms has never be a problem in the past.

 

greetings

 

hello i have exactly the same problems ..i have now deactivated Network Attack Blocker..

is there in the meanwhile a solution or patch for this problem ?

i know this issue from another av engine which cause the same problems and also that it slows down the internet connection for 1 gig networks.

these freezings of the whole system while downloading via steam or similar platforms has never be a problem in the past.

 

greetings

 

Hello,

 

please try to enable RSS for the network adapter. It allows to check network packets using few kernels of CPU.


You need to use PowerShell cmdlet( https://docs.microsoft.com/en-us/powershell/module/netadapter/enable-netadapterrss )

 

If it does not help, submit a ticket to K-Lab Technical Support

> Summary > Technical Support Center > Request Technical Support > Create Request 

 

And send the number of this ticket to me. 

 

Thank you. 

Please sign in to comment

You will be able to leave a comment after signing in

Sign In Now

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.