Bboylubsko

Hi! The way with "echo $ {HOSTNAME}> / proc / sys / kernel / hostname" works perfectly :) The problem is with startx. I have a screen after entering the command, nothing changes, but "echo $ {HOSTNAME}> / proc / sys / kernel / hostname" works, so I'm glad the problem was found :). The picture shows that wifi is off, but only because I wanted to see if everything will start when I turn it off :). I started the startx command with wifi enabled, and no intended effects.

Hi, Andrey Kirzhemanov Here are the KRT files:

In boot mode it works. I changed the file extension from tgz to zip, because I can not add it as a switch.

Hello. Something does not work, I have been waiting for a long time and nothing.

English - Google Translator: I came up with an idea. 1. I set a WiFi router on my smartphone and created a WiFi network from the "bboylubsko" phone. 2. I connected to the "bboylubsko" WiFi network and everything works normally. Internet works and applications start up. 3. I disconnected from the "bboylubsko" WiFi network. 4. Connected to the "No free WiFi for you" network (my home network). 5. Nothing works, I can not open any application. Apparently the only problem is my WiFi and ethernet (that is, generally a router), but the question is why :)? If it was about the lack of internet I still understand, but suspending the entire KRD system? :) [video]https://youtu.be/6F7TcRD18Ts[/video] Polish: Wpadłem na pewien pomysł. 1. Ustawiłem w smartfonie router WiFi i utworzyłem sieć WiFi z telefonu "bboylubsko". 2. Połączyłem się z siecią WiFi "bboylubsko" i wszystko działa normalnie. Internet działa i aplikacje się uruchamiają. 3. Rozłączyłem się z siecią WiFi "bboylubsko". 4. Połączyłem się z siecią "No free WiFi for you" (moja sieć domowa) 5. Nic nie działa, nie mogę otworzyć żadnej aplikacji. Widocznie problemem jest tylko moja sieć WiFi i ethernet (czyli ogólnie router), tylko pytanie dlaczego :)? Gdyby chodziło o brak internetu to jeszcze rozumiem, ale zawieszanie całego systemu KRD? :)

English: My second laptop has the same problem. Once again, only step by step. a) 1. The laptop is turned off. 2. I connect the ethernet cable. 3. Turn on the laptop and boot KRD. 4. The Internet works and all applications work. 5. I disconnect the ethernet cable. 6. Nothing works, the effect is the same as in the films above, does not respond to a double click. 7. In that case I connect the ethernet cable back. 8. Everything works and I can run applications (no effect on the films above, everything reacts to a double click). b) 1. The laptop is turned off. 2. The ethernet cable is not connected. 3. Turn on the laptop and boot KRD. 4. The internet is gone, because the cable is disconnected, but all applications are working (they respond to a double click and start up). 5. I connect the ethernet cable. 6. Nothing works, the effect is the same as in the films above, nothing reacts to a double click. 7. I disconnect the ethernet cable. 8. Everything is back to normal and everything works, I can run applications. I hope I have described everything clearly, I am asking for tests, preferably on laptops. Polish: Mój drugi laptop ma ten sam problem. Jeszcze raz tylko krok po kroku. a) 1. Laptop jest wyłączony. 2. Podłączam kabel ethernet. 3. Włączam laptopa i bootuje KRD. 4. Internet działa i wszystkie aplikacje działają. 5. Odłączam kabel ethernet. 6. Nic nie działa, efekt jest taki sam jak na filmach powyżej, nie reaguje na podwójne kliknięcie. 7. W takim razie podłączam kabel ethernet spowrotem. 8. Wszystko działa i mogę uruchamiać aplikacje (brak tego efektu co na filmach powyżej, wszystko reaguje na podwójne kliknięcie). b) 1. Laptop jest wyłączony. 2. Kabel ethernet jest niepodłączony. 3. Włączam laptopa i bootuje KRD. 4. Internetu nie ma, bo kabel jest odłączony, ale wszystkie aplikacje działają (reagują na podwójne kliknięcie i się uruchamiają). 5. Podłączam kabel ethernet. 6. Nic nie działa, efekt taki sam jak na filmach powyżej, nic nie reaguje na podwójne kliknięcie. 7. Odłączam kabel ethernet. 8. Wszystko wraca do normy i wszystko działa, mogę uruchamiać aplikacje. Mam nadzieję że wszystko jasno opisałem, proszę o testy, najlepiej na laptopach.

.

Yes, I do it step by step and the effect is still the same. :)

If I understood correctly :) : Using the Plates: 1. I downloaded the iso file from the site: https://support.kaspersky.com/viruses/krd2018 2. I burned the iso file using the ultra iso program I have prepared a USB disk with the help of the YUMI multiboot installer. Regarding the preparation of the media, I doubt that this is a problem here, because using the same discs and USB disks on the second computer everything works fine and even connect to the same network. I used "x" to show that after connecting to the WiFi network does not work the scanner itself, which is called by me by double-clicking without success. The problem also occurs with the base upgrade itself, when I connect to the WiFi network, the KRD detects that it needs to update the database. I click Update and the window disappears forever, as if the process was killed and I stay with a clean desktop. The problem also occurs when I am connected to a WiFi network and I try to disable the scanner and restart the computer. When the graphical environment is closed and the console is shown with commands to unload the KRD and restart the computer, it stops and stands at some point. The problem also occurs when I try to connect with the help of an ethernet cable. The exact same situation. I am enclosing a short film: [video]https://youtu.be/oL2BNpXMNyM[/video]

I have recorded a more accurate video of WiFi. :) [video]https://youtu.be/j5L3I8HHoOk[/video]

So the sequence is as follows - When I do not connect to the WiFi network everything works, when I connect, I can not do anything (movie 1): [video]https://youtu.be/aPiNi_THDUk[/video] When I disconnect from the WiFi network everything returns to normal (movie 2): [video]https://youtu.be/sFcbMdCk67g[/video]

Thank you for your response. I wanted to make an emergency scanner that could scan my computer without loading the operating system. I do not have any Kaspersky products, only Kaspersky Rescue Disc. I used the word linux, because Kaspersky Rescue Disc is based on this system and my knowledge of this operating system is small, but if I could help solve the problem (provide some necessary information, logs) I would gladly do it, I would only have to have exact instructions :) I think I found a solution to the riddle Everything works correctly until I do not connect to the WiFi network. When I enter my password and click connect nothing can be done. Greetings :)

I checked what the situation looks like on the second computer, stationary and everything is fine, i.e. the problem is depending on the equipment.

Hi, I apologize in advance for my English, but I use google translator. All in all, you can see everything on the film, nothing works. I tried different options, i.e. burning a krd.iso image on a cd and booting from a pendrive. Each time the effect is the same. Laptop to Hp pavilion 1050ew. The operating system is Windows 10 Home. If you need more detailed information (logs or something else, I am asking for detailed instructions, I do not know linux, but I think I can do it). All is here: [video]https://youtu.be/XBMSUTMwF5g[/video]