IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> 10.3.407 agent no install [Solved], 2016 server does not work even though agents are redirected
yavuzmertozgun
post 16.03.2017 17:11
Post #1


Newbie
*

Group: Members
Posts: 9
Joined: 15.12.2015




Hello there...
We have installed a new Windows Server 2016 ksc. We assigned DNS to the IP of the new server. We created a task named Change management server for the computers above the server. But the agents are not falling. There is a fault that KES is not installed. One looks at the new server and then goes back. Is there any other way?
Go to the top of the page
 
+Quote Post
Kirill Tsapovsky
post 16.03.2017 17:38
Post #2


Technical Support Specialist
**************

Group: KL Russia
Posts: 11366
Joined: 3.12.2013
From: Moscow




QUOTE(yavuzmertozgun @ 16.03.2017 16:11) *
Hello there...
We have installed a new Windows Server 2016 ksc. We assigned DNS to the IP of the new server. We created a task named Change management server for the computers above the server. But the agents are not falling. There is a fault that KES is not installed. One looks at the new server and then goes back. Is there any other way?


Hello.

The server change task should have been run on the older server before it was switched off: this way KSC would be able to communicate with Network agents using the legitimate server certificate, and instruct them to switch to different server settings and re-establish a trusted connection.
If the older server is already down with all the Network agents still attempting to connect to it, the only way to switch them to a new server is to launch klmover on each host locally.

Thank you.


--------------------
In English: GSI report | AVZ report | KSC10 Traces | KES10 Traces | KSC9 Traces | KES8 Traces | klnagchk log
На русском: Отчет GSI | Лог AVZ | Трассировки KSC10 | Трассировки KES10 | Трассировки KSC9 |Трассировки KES8 | Отчет утилиты klnagchk

Пожалуйста, оцените оказанную помощь, используя опцию "Rating" в названии топика!
Please evaluate support help by using "Rating" option!
Go to the top of the page
 
+Quote Post
yavuzmertozgun
post 17.03.2017 09:43
Post #3


Newbie
*

Group: Members
Posts: 9
Joined: 15.12.2015




QUOTE(Kirill Tsapovsky @ 16.03.2017 18:38) *
Hello.

The server change task should have been run on the older server before it was switched off: this way KSC would be able to communicate with Network agents using the legitimate server certificate, and instruct them to switch to different server settings and re-establish a trusted connection.
If the older server is already down with all the Network agents still attempting to connect to it, the only way to switch them to a new server is to launch klmover on each host locally.

Thank you.



My old server is open. I am applying the 'change management server' task on the old server. Server adrese I am showing the DNS address of the new server. Only 10 or 20 of the 400 computers are past. Looking at the settings of some machines, it shows the new server, but then it goes back to the old server. Should I start a different task?
Go to the top of the page
 
+Quote Post
Artem Ershov
post 17.03.2017 11:23
Post #4


Technical Support Engineer
**************

Group: KL Russia
Posts: 6599
Joined: 15.06.2015




Hi,

How did you configure NAgents to connect to KSC server via IP-address or via Domain name?
Could you please provide us task results?

BR


--------------------
In english: GSI report | AVZ report | KSC10 Traces | KES10 Traces | KSC9 Traces | KES8 Traces(RUS) | klnagchk log(RUS)
На русском: Отчет GSI | Лог AVZ | Трассировки KSC10 | Трассировки KES10 | Трассировки KSC9 |Трассировки KES8 | Отчет утилиты klnagchk

Please evaluate support help by using "Rating" option!
Пожалуйста, оцените оказанную помощь, используя опцию "Rating" в названии топика!


Подписаться на новости о корпоративных продуктах
Go to the top of the page
 
+Quote Post
yavuzmertozgun
post 20.03.2017 18:06
Post #5


Newbie
*

Group: Members
Posts: 9
Joined: 15.12.2015




QUOTE(Artem Ershov @ 17.03.2017 12:23) *
Hi,

How did you configure NAgents to connect to KSC server via IP-address or via Domain name?
Could you please provide us task results?

BR


Thank you for your interest. problem solved. I need a little time. To migrate to the new server
Go to the top of the page
 
+Quote Post
Konstantin Anton...
post 20.03.2017 19:57
Post #6


Technical Support Engineer
************

Group: KL Russia
Posts: 3254
Joined: 2.12.2015




QUOTE(yavuzmertozgun @ 20.03.2017 17:06) *
Thank you for your interest. problem solved. I need a little time. To migrate to the new server

Hi,

Marked this topic as solved.

Thank you!


--------------------
In english: GSI report | AVZ report | KSC10 Traces | KES10 Traces | KSC9 Traces | KES8 Traces(RUS) | klnagchk log(RUS)
На русском: Отчет GSI | Лог AVZ | Трассировки KSC10 | Трассировки KES10 | Трассировки KSC9 | Трассировки KES8 | Отчет утилиты klnagchk

Please evaluate support help by using "Rating" option!
Пожалуйста, оцените оказанную помощь, используя опцию "Rating" в названии топика!
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic

 



Lo-Fi Version Time is now: 29.03.2017 15:18