All Activity

WhatsApp+19254941544 How to Apply for a New CA Driver's License in California How to get a Driver License? After you arrive in the U.S. on your nonimmigrant visa, you must apply for the driver's license. It is not legal to drive without a valid driver license. Every state in U.S. has different rules and regulations for motor vehicles. Even though the basic rules are the same you must verify with the regulations of the local Department of Motor Vehicles in your area. You can check the official website to get more information. This article focuses on the California State DMV procedure. How to get a Driving license? There are two steps involved for getting a driver license: Written test. Behind the wheel test (also known as a road test) The written test is a test of traffic laws, road signs, and driving safety rules. You will get a book (driver’s handbook) to study for this exam. Study it thoroughly. There are 46 questions on the test. A passing score is at least 39 correct answers. You have three chances to pass the test. You are allowed to take a retest in one visit. If you fail three times, you must wait 7 days before taking the written test again. No written tests are administered after 4.30 pm on regular business days. What is the procedure? Step 1 Written Test Visit a DMV office (make a prior appointment for a faster service). Submit the completed application form, along with the fee. No copies are accepted. You need to give a thumb print and have your picture taken. Provide your social security number, and proof of your date of birth. Show your original passport. Pass a vision test Take the written test. You will get a temporary permit. If you have never been licensed before, you may use this permit to practice driving. During all the driving sessions, you must be accompanied with an adult who must be 25 years of age or older and holds a valid state license. It is illegal for you to drive alone. You can also take classes from some Instructor. Once you are comfortable in driving take an appointment for a behind the wheel test (road test). If you have moved to U.S. from India, you will be required to take a driving test. If you already have a license from another state, the driving test can be waived. Step 2 Driving Test To take your driving test, you need to make a driving test appointment by calling a toll free number WhatsApp+19254941544 between the hours of 8 a.m. and 5 p.m. Monday-Friday. You must provide the following at the time of the driving test: Provide proof of financial responsibility California Insurance Requirements Like the written test, you must pass the driving test in three chances. If you fail three times, it means that you must practice. Make an appointment once you are fully prepared. For each additional driving test you must pay a $6 fee. The test normally takes 10-15 min. It is a 100 points test, and minimum 70 is passing. This criteria is subject to change. After you pass your driving test you will be issued an interim license valid for 60 days. You will receive a new photo license in the mail. Learners’ Permit/Provisional Instructions permit Normally this permit is issued to teens under the age of 18. However if you are learning to drive for the first time, and/or do not have an Indian International Driving Permit you are eligible to get this permit. Once you have practiced driving on the permit and are ready to give the road test you may apply for an appointment. Please check with the DMV for the current rules on such permits. Tips Read the drivers handbook carefully for traffic rules for the written test. Look at sample tests on the DMV website. Ask your friends for old question papers to get an idea of the test. Once you pass the written test take an appointment for your road test. You can call the toll free number to take this appointment?localeName=en for an online appointment. Take some driving classes from a good instructor. The instructors charge on an hourly basis. Hence make the best of each class you take. Do not hesitate to ask questions about signal rules, sign boards, or anything else. Ask your friends to suggest a good instructor. Do not rely on the recommendation of your HR person for the instructor. That is not enough. Instructors will get their own car for the road test. Getting a preferred appointment with DMV is difficult. You may go to any of the DMV offices, where ever you can get an appointment. During your road test be confident. Follow the rules, look at signs and speed limits, listen to the instructions of the evaluator, and drive safely. If you do not understand an instruction ask the evaluator to repeat it. Do not be in a hurry. Be calm during your test. If you pass the test, double-check your address before you leave DMV and tell the DMV representative if you have moved or if your address is incorrect. If you have not received your license after 60 days,WhatsApp+19254941544 to check on the status for you. Hold onto your interim license with you to provide information when requested. If you don’t get the license for a very long time, contact the DMV office. If your name is different on your birth date and/or legal presence document than the one you are currently using, you will also need to provide an additional acceptable document to establish your true full name, such as; a marriage certificate, dissolution of marriage, adoption or name change document that shows your current name. Do not drive without your driving license or temporary driving permit. For detailed and complete information, visit your state’s DMV web site Commonly asked questions I have recently moved to California. Can I drive a car in California for few days? Yes! According to the current DMV laws, person over 18 and having a valid driver license from his home state or country can drive a car here. But if you take a job in California or become a resident, you must get the California driver license, within 10 days. Indian International Drivers Permit (IDP) works only in certain states. Please make sure that it works for the state you are driving in. I have moved to California from another state in the U.S. How do I get a California license? You will need to go through the procedure described above. You will not be required to take a road test. What are the normal charges for Driving Instructor? Normally their charges are $50-60/2 hrs. Confirm the cost before making an appointment with an instructor. Many instructors prefer to accept cash or check. I am a H4 visa holder, and want a driving license, but DMV asks for SSN. How can I get the driving license without a SSN? The Government does not give the SSN to people on dependent visa. They do give an official denial letter, specifying the reason of denial. You can show this denial letter in order to get your driving license. It is accepted at the DMV. You must also present your unexpired foreign passport with the unexpired I-94. If you have an ITIN number that is also accepted at DMV. You must inquire about the acceptable documents in the absence of SSN with the DMV. I have recently changed my residence address. When should I notify DMV? The change of address must be reported to DMV within 10 days. There is no separate charge for changing your address. You will be required to fill out a form called DMV 14. You cannot request change of address as part of the driver license renewal by internet process. For California the mailing address is: Department of Motor Vehicles Change of Address P.O. Box 942859 Sacramento, California WhatsApp+19254941544

Сами создаем проблему, сами ее решаем. Зачем было создавать тему, раз все равно советов не слушаете 🙂

Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Description Here's how to install KATA 6.0 Ubuntu edition in KVM environment - https://support.kaspersky.ru/KATA/6.0/en-US/265697.htm In the example below we use RHEL 9.3, installed as VM in VMware Workstation Pro 17.0 Step-by-step guide First, you have to install QEMU/KVM , all steps are described HERE Then install from Software application Virtual Machine Manager, here it's 4.1.0 version. After successful installation just open up Virtual Machine Manager application, and click on the icon "Create a new virtual machine" Assuming, you have KATA Ubuntu ISO locally in OS, choose option below and click "Forward" Click "Browse" and "Forward" Click "Browse Local" Locate KATA Ubuntu ISO and click "Open" Next, do the steps as shown on picture below Click "Yes" Assign resources to VM according to THIS article (ignore our settings below, it's just a demo) and click "Forward" Configure a disk (ignore our settings below, it's just a demo) and click "Forward" Name your VM, select a network and click "Finish" Now you should see installation window, proceed like you usually do with standard KATA installation on VMware In this window select ONLY "single", cause KVM supports only this type of installation Select a disk and click "OK" Wait a bit and you should see that installation starts, and now you just have to wait for next step of installation/configuration Now select subnets (usually use default ones) by pressing Enter Choose network > assign IP (static or dhcp, in our example we use dhcp) > set password length and password itself > configure DNS servers Choose if you want capture traffic via SPAN (y or n) > configure NTP servers That's it, KATA installed Now you can login to web UI and configure server, in our example IP of server is 192.168.122.47, let's login to https://192.168.122.47:8443 and voila "Configure" and wait for completion

Заведите родителям отдельную учётку my.kaspersky. Защитой вроде можно поделиться. Хотя инструкции для KTS не нашёл, но поделился. Надеюсь лицензионое соглашение не нарушил

Tiene Android

@Yoji You are welcome and thank you for your feedback. I hope you will be able to fix this issue, if not Kaspersky Tech Support is your best option.

Всё нормально, друзья!!! После того, как в течение двух месяцев служба поддержки Касперского переливала из пустого в порожнее (как в старом анекдоте советских времен, когда мужик приходил в магазин купить туалетную бумагу, которой не было, а ему другой покупатель говорит - я им уже и унитаз приносил, и задницу показывал, а туалетной бумаги, как не было, так и нет), давая шаблонные неработающие рекомендации, я сделал все проще. Удалил вручную все папки и файлы с упоминанем Kaspersky из Program Files x86, Program Data, AppData, а также все ветки и ссылки реестра опять же с упоминанием Kaspersky. И заново его установил. И все работает, как часы - и сам компьютер, и Касперский Премиум. И в списке установленных программ он появился, и следов удаленного Касперского больше не появляется... И не потребовалось никаких танцев с бубнами с переустановкой винды и восстановлением системы. Вот как-то так...

вы про развитие Kaspersky OS ?

Вопрос в следующем: в подписке, можно подключить три устройства, одно моё, другие для родителей, родители тыкают во всё подряд и плохо разбираются в компах, можно ли ограничить второстепенных пользователей в правах на изменение в настройках и лицензиях, чтобы они не могли на ровне со мной добавлять устройства, управлять лицензией и т.д. Надо что бы мой первый аккаунт был "Admin", а другие "User" (а лучше "Lamer").

Unfortunately it is not possible. Locally only.

No success so far unfortunately although your help is very appreciated and I did all things exactly as suggested, seem logical of course and would have been the things done by myself (or very near to it), I just wanted to avoid a complete uninstall, new download etc. but did it Uninstalled successfully, I did not see a single Kaspersky file after this (the uninstall routine suggested to keep the subscription data but I removed them too because maybe exactly this caused problems, could not be wrong in my opinion) I did NOT try to open the UI immediately after the new installation (finished successfully without any errors or so) but did a shutdown and restart instead, cannot be wrong in my opinion either because the software should know/check if it exists on the pc and ask for the license or something similar even after 2, 5 or 20 restarts or not.. After shutdown/restart I had to try to open the software/UI of course, you said "The new application has to synchronize/connect with (your) MyKaspersky account to *pick-up* the License key".. - "You must sign into the Kaspersky application - using the same email address that was used to buy the Kaspersky Standard subscription. Don't try an add an Activation code & OR a License key - anywhere!!" BUT I only got this window asking for an activation code again unfortunately which is a real mystery to me because I did not make a single mistake in installing etc. so I am on a dead end again and do not have any ideas anymore to solve this, seems to me that the software thinks that I do not have a valid license or so maybe but I never did anything other as buying the software legally and install it, all other things would be very silly with an av program anyway (and all is shown as valid in my account with expiration data, license number etc.) So how to continue, would the support give me an activation code in this situation, maybe ? Not sure if this would work anyway or if things are messed up already in hidden areas of the registry or so (not by me but by Kaspersky suspecting wrong things maybe etc.) I will definitely not make a complete os reinstall with creating images and all things necessary, I did never expect that installing/activating Kaspersky would be so difficult, I really would like to use it but am not far from giving up and I think the only solution (if any) would be trying an activation code By the way I used Emsisoft Ant-Malware last years without any problems but the license expired and only Windows 10 and higher get program updates anymore (completely removed from the pc before installing Kaspersky of course), it would have been possible to get antivirus definitions for the longer future with Emsisoft and Windows 7 just using an older program version but a) I considered 40 euros yearly for a single pc license rather expensive and b) heard good things about Kaspersky of course and just wanted to try it but see above, this German security nonsense is irrelevant to me although I live in this not so wonderful country, still using Windows 7 may seem strange but I have my reasons for it and do not need other versions for the things I do and I checked that Kaspersky is okay with 7 before buying of course so I really think that this is not the reason for this strange activation problem but what else.. So how to continue, asking the support for an activation code and try it ? I do not know if you are in the official Kaspersky support or just a helpful person so if you still have another idea I am happy with it but there should be a realistic chance or rather high probability for solving the problem by it, does not make much sense to try this uninstall/new install thing 10 times when chances are very low for a solution by this By the way I cannot imagine that I am the only person with this problem or what about this...

@Zewkia Araaisa Welcome. Please check this

@matiasbsm Welcome. Please continue here Thank you.

Hallo, ich habe 2 Laptop und 3 Android geschützt da ich eine 5 Platz Lizenz habe. Zeige ich das so an wie Du steht da... 3 von 5 Geräten geschützt. Hä ? 🤔 In MyKaspersky werden alle 5 als geschützt angezeigt.

Servus Leut, ich habe es jetzt so gemacht. Kaspersky VPN und Secure deinstalliert. Kaspersky VPN und Secure neu installiert. Allem zugestimmt was notwendig ist. Unten auf ICH HABE EIN ABONEMENT geklickt. Lizenzschlüssel eingegeben. Meldung ( Sinngemäß ) : Achtung ! Ihr Code ist schon in MyKaspersky aktiviert ignoriert bzw bestätigt. MyKaspersky angemeldet auf dem Android. Meldung: Gut gemacht ! Sie haben nun 365 Tage Schutz. Das wars 👍😁

Good afternoon. I would like to know if there is any configuration to prevent APP Lock from requesting the password or fingerprint every time an application is opened, so that it is required only once when unlocking the phone or after a certain period of time (for example, every 5 minutes). It is extremely irritating to have to unlock the app repeatedly, even if you have used it in the last 10 seconds. Navigating between two apps with the lock activated makes the experience very slow. Other locking apps already have this function available. Is this configuration available? If not, where can I contact to suggest this improvement? Thank you

Boa tarde. Gostaria de saber se há alguma configuração para evitar que o APP Lock solicite a senha ou impressão digital toda vez que abrir um aplicativo, de modo que seja exigido apenas uma vez ao desbloquear o celular ou após um intervalo de tempo determinado (por exemplo, a cada 5 minutos). É bastante irritante ter que desbloquear o aplicativo repetidamente, mesmo após o uso recente. Alternar entre dois aplicativos com bloqueio ativado torna a experiência muito lenta. Outros aplicativos de bloqueio já possuem essa função disponível. Existe essa configuração disponível? Se não, onde posso entrar em contato para sugerir essa melhoria? Obrigado.

Hallo, beantwortet irgendwie meine Frage nicht.

Добрый день. Для текущего релиза 1.1.1.40 нельзя получить серийный номер. Мы можем рассмотреть добавление данной функциональности, но не могли бы вы, пожалуйста, предоставить краткое обоснование необходимости.

Just found out from local "dealer" in my country, that there are no more licences for KAV and they are offering only for Kaspersky standard/plus/premium, among other Kaspersky products, which are not KAV and KIS.

Little rant about licence price

Advice and Solutions (Forum Knowledgebase) Disclaimer. Read before using materials. Problem Sometimes it's necessary to check KATA detects, for example IDS, IOA, Sandbox detects. Step-by-step guide IDS detects (SPAN) To check IDS detects (SPAN) you can use tcpreplay utility on server configured to receive SPAN traffic. KATA 4.0/4.1 tcpreplay package for such versions could be found here https://rhel.pkgs.org/7/epel-x86_64/tcpreplay-4.4.4-1.el7.x86_64.rpm.html KATA 5.+ and tcpreplay tcpreplay package is not installed by default, so you should install it manually, using step-by-step guide below: 1) Download this package from HERE 2) Place downloaded file tcpreplay_4.3.2-1build1_amd64.deb to your KATA node. For example, use scp: [user@host]$ scp <your-path>/tcpreplay_4.3.2-1build1_amd64.deb admin@<kata-ip>:/tmp 3) Run installation on your KATA node with the next command: [admin@katahost]$ sudo dpkg -i /tmp/tcpreplay_4.3.2-1build1_amd64.deb Success! Now you can use tcpreplay on your KATA 5.+ or any other UBUNTU system! Before using tcpreplay you should enable tx capture for span: KATA 3.7.* In technical support mode from user root run following commands : systemctl stop apt-preprocessor.service systemctl stop suricata.service rmmod pf_ring Edit file /etc/modprobe.d/pf_ring.conf: change line: options pf_ring enable_tx_capture=0 min_num_slots=16384 # tx capture is disabled to: options pf_ring enable_tx_capture=1 min_num_slots=16384 # tx capture is enabled save file. Start pfring and related services back: modprobe pf_ring systemctl start suricata.service systemctl start apt-preprocessor.service KATA 4.0/4.1 Edit file /etc/modprobe.d/pf_ring.conf: change line: options pf_ring enable_tx_capture=0 min_num_slots=16384 # tx capture is disabled to: options pf_ring enable_tx_capture=1 min_num_slots=16384 # tx capture is enabled save file. In technical support mode from user root run following commands: systemctl stop docker rmmod pf_ring modprobe pf_ring systemctl start docker tx capture for span is now enabled KATA 5.0/5.1/6.0 - see https://forum.kaspersky.com/topic/how-to-enable-tx-capturing-in-kata-katakedre-37514/ Eicar traffic detect: Upload EICAR-Test-File_TCP.pcap sample to server with SPAN interface, then execute command from root shell: tcpreplay -i ens34 EICAR-Test-File_TCP.pcap # ens34 in this example is SPAN interface Nmap traffic detect: Scenario is the same as for Eicar detect, only .pcap file differs (# tcpreplay HackTool.Nmap.HTTP.C&C.pcap). After testing detects from span we strongly recommend to disable tx capture back again by the same way as described above for enabling. AM Engine Use EICAR's - https://www.eicar.com/ Email - send the EICAR via SMTP to KATA 25 port. (SMTP processing needs to be Enabled of course). ProTip: you may use local swaks mail client on CN to skip elaborate mail setups. swaks examples swaks --server 127.0.0.1 --port 25 --from antony@test.org --to cleopatra@test.org --attach eicar.com swaks --server 127.0.0.1 --port 25 --from antony@test.org --to cleopatra@test.org --body "link_to_EICAR_here" Endpoint - put an EICAR file to the endpoint and fetch it using GetFile task, queue for scanning. YARA detects By default, no YARA rules are supplied with the product. For test purposes one can use a test rule from YARA docs https://yara.readthedocs.io/en/v4.1.0/writingrules.html rule ExampleRule { strings: $my_text_string = "text here" $my_hex_string = { E2 34 A1 C8 23 FB } condition: $my_text_string or $my_hex_string } The rule will mark any analyzed object containing $my_text_string or $my_hex_string. IoA detects To check IoA detect (IoA detects can be checked only if you have KEDR license): Copy .bat file from attached archive Test_IOA.rar(not_infected) to any folder on host with installed EDR and start it. After some time(KATA need several minutes to transmit and process telemetry from EDR) check alerts in KATA. Alert should have type ioa_test_detect. For testing IoA detects on host more than once, .bat file should be placed to different locations on this host. On the host with installed KEA run command below in the cmd.exe shell: wmic.exe sfdguninstallkasperskyblabla There can be something else instead of sdfg and blabla, important part of command is uninstallkaspersky Command execution will fail with error, but it's not important. After some time new IoA detect should appear in KATA web-interface. IoC detects One can use the custom rule for testing - Ioctest.zip (infected123) - it is triggered for "c:\windows\system32\calc.exe" Automatic sandboxing in EDR To check automatic sandboxing: Unpack the archive with sample, use default password for samples: autosbtest.zip NB! Do not change MD5 of the sample. Run the sample on EDR-protected host and wait for automatic SB detect: Sandbox detect To check sandbox detect we can use file SA_sleep.exe from archive no_am_detection sample.rar. Password is inside text document in archive. Go to KATA senior security officer web-interface. Choose Storage → Upload and upload SA_sleep.exe from attached archive for KATA checking. Kata should enqueue it to sandbox , then a bit later verdict from SB should be Suspicious Activity. If SA_sleep.exe produces Not detected verdict then please use test_sb.bat from the test_sb.rar URL reputation Firstly, confirm K(P)SN is configured and works properly. MD5 used in this example should return UnTrusted status: Check KSN on KATA command for KATA 4.+ and 5.0: docker exec -it `docker ps | grep ksn_proxy| awk '{print $1}'` /opt/kaspersky/apt-ksn_proxy/sbin/ksn_client --ip 127.0.0.1 --hash 9C642C5B111EE85A6BCCFFC7AF896A51 for KATA 5.1: docker exec -it $(docker ps | grep ksn_proxy| awk '{print $1}') /opt/kaspersky/apt-ksn-proxy/sbin/ksn_client --ip 127.0.0.1 --hash 9C642C5B111EE85A6BCCFFC7AF896A51 Secondly, For traffic: access http://bug.qainfo.ru/TesT/Aphish_w/index For email (SMTP processing needs to be Enabled), send the link above via e-mail. For quick and dirty test: swaks examples swaks --server 127.0.0.1 --port 25 --from fisherman@test.org --to cleopatra@test.org --body "http://bug.qainfo.ru/TesT/Aphish_w/index"

Ist erledigt. Danke

и у меня уже нет

what access do they have if my friends/family share device now