Jump to content
  • Announcements

    • Rodion Nagornov

      Долгое сохранение сообщений || Delays while posting   09/20/2017

      По техническим причинам возможно визуально долгое отправление сообщений на форуме. Фактически ваше сообщение публикуется мгновенно - долго отрабатывает графика. В случае подобной ситуации, пожалуйста, сначала обновите страницу (F5) и проверьте, появилось ли ваше сообщение. Не пытайтесь сразу отправить его заново.  || Due to some technical reasons visual delays are possible while message sending. Actually your message is published immediately - just interface works long. In such case, please, do not re-send your message immediately! Press F5 to reload the page and check if your message/topic is published.
Ilya Zadonsky

Project "QA Info", an external bug tracker

Recommended Posts

Hello!

 

Test version 2015 MR1 came to an end. At the beginning of the 4th quarter of this year, TR will be available to users. But the test in the forum does not end - to be continued in 2015 MR2! It should be expected in the month of October this year, a little earlier or later (IMHO).

In version 2015 MR2 will continue to implement the wishes that have been collected and approved to implementation of the project «usability research project».

 

It should be noted that in this season beta changes were made in the approach test process:

- Processing of bug reports moderators section and then adding them to an external bug tracker;

- Integration testing forum section «Kaspersky PURE» in KIS / KAV. Because that was implemented migration between home products KAV, KIS and KTS.

On this change is not completed - on the order of external bug tracker.

 

That bug tracker which is now implemented in the tables Google, fails to achieve:

- Simple, intuitive error correction and implement the wishes of future fees and / or future versions of the product;

- Do not allow to organize a more flexible "inverse" relationship between the tester and the employee.

Because of what might be a problem relevance of these errors and wishes in future versions. In addition, the table google is not very convenient to work for them in the form of bug lists for large-scale projects, without having special skills to work with the data.

 

During testing, the 2015 MR2 project will be launched «QA Info», is an external bug tracker. The project is made based on the open Web server application Redmine, which is a very good account of itself in the vast World Wide Web.

 

The new project will see the steps of fixing a bug in the new versions of the product. New tracker will allow the tester to track the status of your and / or important for him bugs / suggestions via e-mail notification. In addition, you can optionally locally to discuss the issue in a separate bugs / suggestions. The main channel publishing bug reports, their discussions and remains active forum section, entered the project only replaces the table Google.

 

Development team hope that you enjoy the updated bug tracker. :bs:

Edited by Jowi

Share this post


Link to post
Share on other sites

Good afternoon.

 

The project is under maintenance, please do not make changes to the current state of the base data may be lost.

I informed further when the project will work in a stable mode.

 

Thank you for your understanding.

Share this post


Link to post
Share on other sites
ibok   
Good evening.

 

Work on the project is complete, will be updated as soon as the DNS records you can enter him.

 

Have a nice evening.

Ilya Zadonsky sorry to disturb you but I have some questions.

1.Why from the moment that you have the new KIS you stopped to give to the people the good old one KIS 2014?(In 2 days

maybe in one day?I Think that I have the answer if not please correct me.Maybe because you need as much as possible new beta testers?

2.That is not good for anybody that does not want to be a "Beta Tester" did you ever think about that?

3. I had an answer from somebody which was telling me that all new products do the same.YES but Microsoft let's say gives the new patches without the need to "remove" anything.We have to download the new versions and everything comes better.

As per the new antivirus products I think that do not the same.

Finishing we had to remove 3 plus the new that we have- I run now -Version 2015 (15.0.1.415)a.and I must to remove this version and install the last version which willbe the last -which is not ready.

The name will be 2015 MR2.

Wauting for yr reply hopping that this post will not be erased.

Regards

PS my opinion is as clean as I could!!

Share this post


Link to post
Share on other sites
ibok   
Ilya Zadonsky sorry to disturb you but I have some questions.

1.Why from the moment that you have the new KIS you stopped to give to the people the good old one KIS 2014?(In 2 days

maybe in one day?I Think that I have the answer if not please correct me.Maybe because you need as much as possible new beta testers?

2.That is not good for anybody that does not want to be a "Beta Tester" did you ever think about that?

3. I had an answer from somebody which was telling me that all new products do the same.YES but Microsoft let's say gives the new patches without the need to "remove" anything.We have to download the new versions and everything comes better.

As per the new antivirus products I think that do not the same.

Finishing we had to remove 3 plus the new that we have- I run now -Version 2015 (15.0.1.415)a.and I must to remove this version and install the last version which willbe the last -which is not ready.

The name will be 2015 MR2.

Wauting for yr reply hopping that this post will not be erased.

Regards

PS my opinion is as clean as I could!!

To whom it may concern!!

Thanks for the NON having an reply to my problems.

Best Regards

ibok

P.S. And I am writing here because I thought I had a proper reply.

Have a nice day or afternoon or evening.

Edited by ibok

Share this post


Link to post
Share on other sites
To whom it may concern!!

Thanks for the NON having an reply to my problems.

Best Regards

ibok

P.S. And I am writing here because I thought I had a proper reply.

Have a nice day or afternoon or evening.

Ilya Zadonsky just can't answer to you to any questions, do not contains concrete matter about beta-testing process. I can't to. This topic about beta-testing process, and QA specialist must answer here to questions in his competency. No more, no smaller.

By other words - it is the wrong topic where you trying to ask wrong man.

Thanks for understanding.

 

P.S. Do not need to answer to this post. Thanks again.

Share this post


Link to post
Share on other sites

Announcement:

 

You can receive similar messages from our project, it is due to debugging of the automatic synchronization system of external and internal bug trackers.

Share this post


Link to post
Share on other sites

In fact I'm getting hundreds of emails notifications from QA :)

Share this post


Link to post
Share on other sites
pratty   

The site looks down from here. Neither is working for me.

 

http://s-evil.ru/redmine/ nor http://185.91.175.77/redmine/

 

 

EDIT: Connection times out error on both. But I can visit cloud.s-evil.ru without any problems.

Edited by shukla10

Share this post


Link to post
Share on other sites
For me it is working, when i use this one - http://s-evil.ru/redmine/

Hi, Jowi

 

I am afraid I also can't visit "http://s-evil.ru/redmine/". But I can visit cloud.s-evil.ru without any problem... :dash1:

 

post-57831-1442972964_thumb.png

 

According the tracert log, The route line is different. The "mnogobyte.net" is the last jump point which can be tracked.

 

It is a bad situation for me... :ai:

Share this post


Link to post
Share on other sites

Friends, the project has been allocated a new domain name qainfo.ru

 

By the end of 2016MR1 bug tracker will be opened at the old address, but then s-evil.ru, I will use for personal needs.

 

Ilya

Share this post


Link to post
Share on other sites

Hello.

 

I present to your attention a utility that will help in testing the product.

 

a6b8f338fab0270bda1f65b9136bc4f3.png

 

At the moment the utility has the following functionality:

- On / Off product traces

- Deletion of traces

- Collection of traces + dump files (zip)

- Create a screenshot + upload to the server. (In development - screenshots can be deleted)

- An announcement when a dump file is found (GUI + (win10 toast))

- Announcement when a new Beta version (GUI)

- Announcement when a new version of the program is released

- Work in the tray (off \ screenshot)

- Displaying the size of the log file

- Adding to Startup

 

Supported OS above Windows 7

 

Download

 

A convincing request for all comments and suggestions to write on this topic.

If there is a bug, a detailed description is desirable.

Share this post


Link to post
Share on other sites
Jowi   

Using 1.1.0.0 and installed is KTS18 on Win7. The tool gives me only a link to new beta 205.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×