Hi,

I have to make Master and Slave Servers of Administration Kit. But 2 servers have different Network Family

IP Address of 1st Server 192.168.101.1 and 2nd Server 192.168.125.101. Subnet Mask are same 255.255.255.0.

Anybody can suggest how to connect Admin Kit's of these 2 servers so that they can work as Master and Slave Servers ?

Your servers are resides in the different networks (IP address/Subnet Mask). In such case some router (level 3) must be between them.
What is the Default Gateway setting?
Can you ping one server from another or not?

In case slave server is not accessible from the master, you should establish master-slave link from the slave side. The only requirement is that master's ports be visible from the slave side. Slaves could be behind firewall, NAT, proxy, etc, it does not matter. So you need to do the following:

1) Create required slave record on the master. Connection with the slave is not established on that step.
2) Establish connection with the master ON THE SLAVE side. In case master is visible from the slave side, everything should work OK.

For more details see here:

http://support.kaspersky.com/ak6mp1/implem...g?qid=203383644